Tobee™ Pipe Jacking Charge Pump

Tobee™ TG Sand Gravel Pump are the most comprehensive range of centrifugal gravel sand pumps for use in mining, chemical and general industry applications. The horizontal sand gravel pumps are designed for heavy duty applications such as mining, power sector,dredging river,and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density sand and gravels. 

Specification:

Size (discharge): 4" to 22" Pump
Capacity: 36~ 3700 m3/hr
Head: 6m ~ 95 m
Handing solids: 0 ~ 650mm
Concentration: 0%~ 70%
Material:High chrome alloy

Detailed specification:

1. Advanced hydraulic dredging sand pump model, CAD 3D design, high efficiency and obvious energy-saving.

2. Large dredging sand depth, high density of dredging mud, good pump NPSH and strong suction lift ability.

3. Strong through-put. The dredging pump can persistently discharge gravel, high plastic soil lump,etc.

4. The gravel sand pump can be directly matched with either motor or diesel engine.

5. Wide application.The gravel sand pump can be used in various kinds of soil quality. Generally,the dredge sand pump is matched with an impeller with 3 or 5 pieces of vane. At the same time,the impellers can be provided with various diameters and vane types to suit kinds of working conditions.

6. Little hydraulic loss, high efficiency and low oil-consumption.

7. Little volume, light weight.

8. Steady operating, little vibration, low noise.

9. Simple & reliable construction, easily disassembly & assembly,convenient maintain.

10. Reliable sealing without leakage.

11. Long operating life of parts.

Tobee™ TG Sand Gravel Pump Performance Parameter:

Tobee™ TG Sand Gravel Pump Component Diagram:

Tobee™ TG Sand Gravel Pump Structural Drawing:

Tobee™ TG Sand Gravel Pump Shaft Seal:

Packing seal:

As one of the most commonly used seals for rotating shafts, the packing seal can come with low-flush or full flush arrangement which uses flushing water to prevent media from escaping the pump housing. This kind of seal is suitable for use under all pumping conditions. In situations where corrosive solids or high temperature might be encountered, Teflon or aramid fiber is used as the packing material for the gland. For high abrasion conditions, a ceramic shaft sleeve is available. 

Expeller seal:

The combination of impeller and expeller creates the pressure needed to seal against leakage. Together with the gland seal or lip seal which is used as the shut-down seal, this type of seal can handle sealing requirements for applications where full-flush gland seal is impractical due to lack of water on the site, or sealing water is allowed to enter inside the pumping chamber to dilute the slurry.

Mechanical seal:

TH series heavy duty slurry pump utilizes a leak-proof mechanical seal design which allows easy installation and replacement. Other types of mechanical seal are among options to suit the slurry pump for various pumping applications.

Tobee™ TG Sand Gravel Pump Drive Type:

Tobee™ TG Sand Gravel Pump Quality  Control:

Tobee™ TG Sand Gravel Pump After-sales Service:

As the slurry pump wet ends parts such as the impeller,volute liner,FPL insert,Throat bush are consumption parts and we could provide you always the qualified slurry pump parts within very short time.

Packing Transport Services

Considering the order pump size and we could provide case or pallet as per your need to make sure it safe enough during the long distance road and ocean shipping.have its own export company  and so we could help you find the best ocean shipping solution and service for you from the goods out of factory to your destination.

Installation Services

Tobee Pump have more than 30 years experienced pump installation workers and are very aware of any onside application.We could provide abroad pump installation service and expect pump manufacturing and sales,abroad pump installation is getting more and more popular by our regular clients abroad.

Technical Support Services

Technical data sheet,Performance curve,General arrangement drawing,Operating manual will be sent within 24th for your checking, So Pls feel free to contact us If you have any need.

Tobee™ TG Sand Gravel Pump On-Site Application:

1)Mine:Black, non-ferrous ore slurry material pump and all kinds of concentrate and tailings conveying

2)Metallurgy:Transport various slurry for aluminium or steel manufacture

3)Coal: Coal mining, washing and various coarse and fine coal slurry transportation

4)Electricity:Remove power plant ash,wash ash,various ash dregs or ash slurry transportation

5)Construction materials:Various mud sand slurry(such as Cement slurry) transportation

6)Chemical: Phosphatic fertilizer or potassic fertilizer factory various abrasive slurry trasportation

7)Water conservancy:Lake,river dredge, sediment,grit, High plastic clay Suction line to transportation

Tobee™ TG Sand Gravel Pump Spare parts:

FAQ: