Home Companies Tianjin Machinery & Electric Equipment IMP & EXP. Co., Ltd.

Products List

Tianjin Machinery & Electric Equipment IMP & EXP. Co., Ltd.

Featured Products: Cummins Generator, Deutz series diesel generating set, Generators Perkins and more.
This series’ diesel generating set which power section uses Commins NTA or KTA series diesel engine has the characteristics such as slight volume, large power and low noise. The ...
[Last Updated : 2016-05-05]
This series’ diesel generating set which power section uses Deutz series diesel engine has the characteristics such as slight volume, large power and low noise. The generator ...
[Last Updated : 2016-05-05]
Mode 30GF/GT 50GF/GT 60 ~ 75GF/GT 80 ~ 90GF/GT 100 ~ 120GF/GT Technical Parameter of Diesel Generating Set and Mobile Power Plant Rated Power (KW) 30 50 6075 8090 100120 Apparent ...
[Last Updated : 2016-05-05]
Casing is used as wall of oil or gas well. Features: purified steel; stable chemical composition; good quality surface; high accuracydimension (Accu-Roll tube rolling mill is also ...
[Last Updated : 2016-05-05]
Tubing is used to pump oil or gas. Features: purified steel; stable chemical composition; good quality surface; high accuracydimension (Accu-Roll tube rolling mill is also called ...
[Last Updated : 2016-05-05]
HEXAGON FLANGE BOLTS STANDARDS: DIN6921 STUDS STANDARDS: DIN975/ B.S. / ANSI HEXAGON NUTS STANDARDS: DIN934 BRIGHT MILD STEEL HEX NUTS STANDARDS: B.S.1083 HEX NUTS AND HEX JAM NUTS ...
[Last Updated : 2016-05-05]
OUR GALVANIZED AND HOT DIPPED GALVANIZED ROOFING NAILS HAS SMOOTH SHANK AND TWISTED SHANK. THEY ARE WIDELY USED FOR THE HOUSES IN TROPICAL AREAS AND THE INSTALLATION OF ROOFING ...
[Last Updated : 2016-05-05]
SLOTTED COUNTERSUNK HEAD TAPPING SCREWS STANDARDS: DIN7972 ANSI/ASME B18.6.4 1981 IFI H-24 (E-20) CROSS RECESSED RAISED COUNTERSUNK HEAD TAPPING SCREWS STANDARDS: DIN7983 CROSS ...
[Last Updated : 2016-05-05]
1 Specification: Thickness: 0.2-2.0mm Width: <=300mm Mechanical properties: TYPE Tensile strength(b/Mpa) Elongaiton (%) soft steel strip 280-450 >23 half soft steel strip 380-500 ...
[Last Updated : 2016-05-05]
Specification: Thickness inch 0.049 0.042 0.035 0.032 0.028 0.025 0.022 0.020 0.018 0.016 0.014 mm 1.2 1.0 0.90 0.80 0.70 0.65 0.60 0.50 0.45 0.40 0.36 Width inch 3/4-11/4 3/4-11/4 ...
[Last Updated : 2016-05-05]
Specification: Thickness inch 0.049 0.042 0.035 0.032 0.028 0.025 0.022 0.020 0.018 0.016 0.014 mm 1.2 1.0 0.90 0.80 0.70 0.65 0.60 0.50 0.45 0.40 0.36 Width inch 3/4-11/4 3/4-11/4 ...
[Last Updated : 2016-05-05]
Name Open type closed type Overlap type (snap on) (Thread on) (Push) Classification strap width seal length strap width seal length strap width seal length Size mm (inch) 12.7(1/2"...
[Last Updated : 2016-05-05]
Specification: Thickness: 0.2-2.0mm Width: <=300mm Mechanical properties: Grade Tensile strength(b/Mpa) Elongation (%) 1 270-410 26-28 2 270-390 32-34 3 270-370 36-38 4 360-510 19...
[Last Updated : 2016-05-05]
Specification: Thickness: 0.2-2.0mm Width: <=300mm Mechanical properties: Tensile strength(b/Mpa) 270-500 270-380 370 Zinc weight: <=100g/mm2 Packing: ①.2 or 3 small coils per ...
[Last Updated : 2016-05-05]
Specification HIGH TENSILE TENSIONERS HIGH TENSILE SEALERS Width 19mm ,25mm,32mm 19mm,25mm,32mm Thickness 0.4--0.9mm 0.4--0.9mm fit strapping seal / 16mm,19mm,25mm ,32mm
[Last Updated : 2016-05-05]
The Tensioners weight approximately 4.3kg,The sealer weight approximately 3.2kg. Steel strapping for size 19mm pulls tension up to 10KN ,Steel strapping for size 32mm Pulls tension ...
[Last Updated : 2016-05-05]
The tools weight approximately 13.5kg. Steel strapping for size 19mm pulls tension up to 10KN , Steel strapping for size 32mm Pulls tension up to 13KN. Specification HIGH TENSILE ...
[Last Updated : 2016-05-05]
Vane pump Vane pump is an efficient economizer-pump the recently developed in this company of efficiency over 80%, It is good to transfer various medium-viscosity petrochemicals of ...
[Last Updated : 2016-05-05]
Rotary pumps Rotary pumps are classified into two general categories and then subdivided into four/five categories each: ROTARY PUMPS SINGLE ROTOR MULTIPLE ROTOR VANE PISTON ...
[Last Updated : 2016-05-05]
Screw pump Screw pump is a kind of positive displacement turnround pump . The pump has characteristics of great flow , high pressure , no pulsation , small vibration , low noise ...
[Last Updated : 2016-05-05]
Page 1 of 8 :   |< << 1 2 3 4 5 6 7 >> >|