Active Member
|
[China]
Address: taicheng raod baoji city shaanxi china
Contact name:tony lee
Baoji Fitow Metal Co.,Ltd |
|
|
Titan Ti Grade 5 Gr5 aerospace sheet / plate material AMS 4911
| Product | Titanium plate&Titanium sheet |
| Grade | Alloy Titanium, Grade 5 , Ti 6AL 4V, T-A6V, Din 3.7164, UNS R56400 |
| Standard | AMS4911- aerospace material standard |
| Specification | Hot Rolling: Length 1000-4000mm,Width 400-3000mm,Thickness 4.1-60mm Cold Rolling:Length 1000-3000mm,Width 400-1500mm,Thickness 0.3-3.0m |
| Chemical Composition Limits | ||||||||||
| Weight % | Ti | C | Fe | N | Al | O | V | H | Y | Other |
| Ti-6Al-4V | bal | 0.08 | 0.03 | 0.05 | 5.5-6.75 | 0.20 | 3.5-4.5 | 0.015 | 0.005 | 0.40 |
processing technique:titanium sponge —compacting electrode—melting—titanium ingots—
forging—slab—hot rolling—hot-rolled sheets
Titanium Sheets Production Show:
surface quality:
1 The surface of the titanium plate should be smooth with its metal colour. The plate was permited to sand blasting with surface before delivery.
2 The surface was allowed with light darkness and water print in part ；local defects ,scratch,indentation and scallops with thickness less than half of the thickness was allowed ,but the minimum thickness should be ensured.
3 There should not be macro defects such as crack,peeling, oxide skin,backfin,and mixture with metal and non-metal.also should not be alkali washed too much.
4The plate was allowed to clear away the local defects along the direction of rolling ,but the thickness after clearness should not less than the minimum thickness allowed.
5In addition, the plate should not be delamination.
