|
[China]
Trade Verify
Address: Industrial Zone, Botou City, Hebei Province, China
Contact name:Jing
Cangzhou Huachen Roll Forming Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
| 1. The Product Description |
(1). Brief Introduction
The purlin made by C Purlin Roof Steel Profile Roll Forming Machine is widely used in the main body stress
structure of the large and medium-size construction, such as the plant, the warehouse, locomotive shed,
hangar, exhibition building. it is known as economic and high efficient building material.
The steel C purlin has following features:
a. Light weight, low cost;
b. Easy to operate: the purlin can be formed and punched according to your actural
need;
and it can be installed directly.
(2). Working Flow of Roll Forming Machine
Coil decoiling-Coil feeding-Leveling-Roll forming-Punching(optional)-Length measuring-Sheet
cutting-Sheet surpporting
(3).Technical Detail
A. General
| Suitable Material | Hot rolled strip steel, Q235 or equivalent |
| Material Thickness | 1.5-3.0 mm |
| Material Width | 175-465mm |
| Dimension | About 10.0*1.2*1.75m(L*W*H) , as per the drawing |
| Working Space | About 20.0*2.7m(L*W) |
Length of the Sheet | You can set the length according to your need. It is controlled by PLC which can ensure the accuracy of ±1mm. |
| Cutting | Automatically stop and cutting when it comes to the set length. |
B. Components Details
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 400# steel. More stable and no shaking. |
| Middle Plate | 16mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 11-16, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
Treating process: tempering- finish turning, high rigidity, hard to deform. | |
Cutting Blade Material | Cr12, hardness HRC60-62. |
| Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C. Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate. |
| PLC | Delta DVP14ES |
Well-adapted to various conditions, such as moisture, electromagnetic disturbance. | |
| Frequency Converter | Delta VFD-M. It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
Length Measurement Device | Omron, made in Japan. |
| It features with high accuracy and stability. |
Our Advantage
Reference Profile Drawing
