Home Companies CIXI TIANHAO ELECTRIC TECHNIC CO.,LTD

thread locker applicator machines

Active Member

Contact Us

Address: NO.789 huchong road cixi city

Phone: 86-574-63688107

Contact name:Grace Chen

CIXI TIANHAO ELECTRIC TECHNIC CO.,LTD

thread locker applicator machines

City & Province Ningbo Zhejiang
Categories Electronics Production Machinery

Product Details

Threadlocking equipment hasanother nameasthread locker applying machine,pre-coat sealantequipment.Thread locking equipment,anaerobic and cyanoacrylate adhesive dispensingmachine.


Advantages of equipment:


1. Table and uniform spiting, fast processing speed.

2. Reduce reject rate, defects, rework time and spot guiding.

3. Replace of screws gasket and sealing belt, and keep the thread from chemical corrosion.

4. Improve greatly resistance vibrations, high temperature, and anti-loose, and the rate of use and reuse the screw of pneumatic joint or others.

2012 thread locking & sealing improvements:

1. Add high precision liner rail on the load and unload material, Independent cylinder driving, greatly improve the stability.

2. Add springing advice above of dispensing nozzle, which prevents jumping tooth with screw if diameter precision is not high or screw ends tapered down slightly.

3.the thimble cylinder quote big cylinder which keeping the function of moving and regulating, more live up to different length products replacing operations.


Advantages of dispensing the screw & pneumatic joint:

1. Replace of screws gasket and sealing belt, and keep the thread from chemical corrosion.

2. Improve greatly resistance vibrations, high temperature, and anti-loose, and the rate of use and reuse the screw of pneumatic joint or others.


Performance:

1. Set freely the alveolar amount, position and width of dispensing. Can adjust the start and end positions of adhesive gluing, any total or partial.

2. High precision position, fast speed, high efficiency and long use life; High quality, accurate and consistent to coating. For example, like 1mm thread, can finish a qualified product every 3 seconds.

3. Supply convenient user control screen. Intuitive operation parameters. Less than half a day, you can learn and operate. Low maintenance rate.

4. Compact body. And use the chamfer to attach part between machine and people, which can avoid injuring.

5. According to the production process need, can be configured a mass storage device,which can avoid changing the material frequently and save much time.

Benefits

Clean, drip-free cutoff

Greater process control

Better product quality, reliability and appearance

Less rework and fewer rejects

No fluid waste and mess

Simplified training for new workers

Models

T&H-TH-2004L3 dispenser 110V-CE

T&H-TH-2004L3 dispenser 220V-CE

T&H-TH-2004L3-Z410 dispenser 110V-CE with automatic load and unload

T&H-TH-2004L3-Z410 dispenser 220V-CE with automatic load and unload


Specification:
Standard: CE Approved

Patent No: 201020120745.9

Length:<;60 mm

ID Size: M3-M30

Tooth pitch:(0.5-5)mm

Width of thread: 150mm

Drive: Precision step motor

Control way: Micro Master

Motor speed: 10~200 Cycles/minute

Repeatability: ±0.01mm

Frequency: 2-5sec/pcs
Input Air: 1-7 bar (100 psi) maximum

Output voltage: 0.1bar-7bar
Input voltage: 110 VAC or 220 VAC
Internal Voltage: 24 VDC

Weight: <;10Kg
Size: 550 x 400 x 750(cm)


Operating Conditions:

Temperature: 5°C to 45°C (41°F-113°F)

Humidity: 85% RH at 30°C non-condensing


Technological parameters:


length

Within 60 mm

diameter


M5-M30

Width of thread

120mm

Tooth pitch

0.5—5mm ( can be adjusted)


Day production

8000-10000 / piece


Glue

Screw: Loctite ( dark red)

Pneumatic joint: Sanjian (white)


Thread sealants, anaerobic adhesives, thread lock-solid rubber, locking rubber, tube thread sealants, dry film adhesives, and liquid sealing belt

Range

Screws, bolts, studs, nuts, Plug and various pneumatic connector


Applications:
Screw, bolts, studs, bolt, nuts, wood screws, self-tapping screws, washers, variety of pneumatic fittings, etc.


Apply liquid material:
thread locker, thread locking adhesive, Screw-thread Retaining Compound, Rep-applied thread locker, thread-locking adhesive, anti-loose glue, cyanoacrylate and Anaerobic Flange Sealants, Thread Sealants, Pre-applied Thread Sealants, pre-coat sealant, thread locker applying etc.


Complete with an accessory dispensing kit

NO

Picture

Name

QTY

1


25Y Tank

1pcs

2.


O ring with tank cap

1pcs

3


Air tube

1pcs

4


S/S tip

5pcs

5


foot pedal (2 core)

1pcs

6


220Vpower cable

1pcs

7


Air tube 6x4

1pcs

8


Connect line(3 core)

1pcs

9


TEE Ø6 mm

1PCS

10


Valve(select)


1pcs

11


300CCbarrel/piston(select)

1pcs


Hot Products

TH-2004D-530Y Dual Station Desktop Dispensing Robot T&H Dual Station Desktop Dispensing Robot with ...
Cartesian robot for Car parts assembly line TH-206H-2012 The Cartesian-Gantry construction of these ...
TH-206H Cantilever Robots The TH-206H Benchtop Gantry dispensing Robot Benchtop Gantry Robot ...
TH-206H Cantilever Robots TH-2004AD Floor-type design and gantry-style three-dimensional Transfer ...
TH-2004D-300KJ Automatic Robotic filling and Coating Equipment TH-2004D-300KJ offers reliable ...
TH-2004D-300R 4 Axis Benchtop Robotic Dispensing Systems Four axis and four-linkage running R-axis: ...