Home Companies Jinhu Color Powder Coating Co.Ltd

Single Conductors Insulating Epoxy Coating RAL 1001 Color Chemical Resistant

Active Member

Contact Us

[Ukraine]

Address: Room 310-2, Building 3, No.56 Lingzhi Road, Xinghe World, Xuanwu district, Nanjing 210028, China

Contact name:Coco chen

Jinhu Color Powder Coating Co.Ltd

Single Conductors Insulating Epoxy Coating RAL 1001 Color Chemical Resistant

Country/Region Ukraine
City & Province nanjing
Categories Appliance Paint

Product Details

RAL1001 beige Insulating Epoxy Coating for single conductors  

 

In need of insulated copper or aluminum conductors for tight-fitting, durable bus systems, Storm Power Components provides the expertise, capabilities and equipment to manufacture high dielectric, epoxy powder-coated bus bar.


Epoxy Powder-Coated Insulation offers a high dielectric strength while creating durable insulation, impervious to most elements allows for closer busbar location in a system ideal for single conductors or multiple conductor assemblies that may have numerous forms. Epoxy powder coating is also well suited for insulating thick conductors, in addition to conductors with multiple electrical contact points.

 

Epoxy powder coating is a free-flowing, thermosetting dry powder. Think of this process as a way of "melting" paint over a bisbar's surface to create a durable, protective surface with thickness ranging from 6 to 120 mils or .006 to .120 inches. When the epoxy powder cures, a cross-link occurs increasing molecular weight and insulation capability.


Epoxy powder is chemical resistant and one of the oldest powder paints used in the electronics industry. It not only protects against corrosion but carries a high insulation rating of 800 volts per mil (.001 inches) at a minimum of 10 mil (.010 inches). Due to safety consideration it is recommended that a High-Pot test is preformed rather than rely on film thickness.
Tensile strength on raw and plated copper bar is in the range of 7500 PSI. UL rating is 130 Cº. Epoxy powder coating's high dielectric strength can be varied based on the application process, thickness and component preparation.

 

 

Powder Coated Film Mechanical Properties

Salt Spray Test

5% NaCl Solution for 500 hours - No change

Acid Resistance

5% HCL for 48 hours dip test - No change

Alkali Resistance

5% NaOH for 48 hours dip test - No change

Surface Preparation

All surfaces shall be degreased and pre-treated for optimal performance before application

Aluminium

Yellow chromate or green chromate/phosphate

Ferrous metals

Zinc phosphate or Iron phosphate

Zinc coated metals

Zinc phosphate or choromate conversion

Storage Stability

Store in ventilated, dry, clean room, temperature < 25℃

Relative humidity 50-65%

Away from direct sunlight, fire, heat

For best performance, use within 6 months

 

  

 

 

Hot Products

RAL 3020 Traffic Red Pure Polyester Powder Coating Fusion Bonded Epoxy Powder Coating Most powder ...
Melon Yellow Polyester Powder Coating Durable Equipment Powder Coating RAL 1028 RAL 1028 Melon ...
RAL 1032 Broom yellow polyester powder coating , high Temperature Powder Coating On Gas Appliance ...
RAL 2007 Luminous bright orange polyester powder , chemical resistant powder coating Looking for a ...
Industrial Pure Polyester TGIC FREE Powder Coating for Metal Finish BRIEF INTRODUCTION Electrostatic ...
Low Curing TGIC-Free Polyester Exterior Wrinkle Orange Peel Effect Uv Resistance Powder Paint ...