|
[China]
Trade Verify
Address: 2303 Century Square , Zhongnan Road , Wuhan ,China
Contact name:Frank
Wuhan Global Metal Engineering Co., Ltd |
|
Verified Suppliers
|
|
|
Electric heater custom hot runner nozzle heater for injection mold
Description:
Hot runner nozzle heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with MgO powder and compacted for faster and efficient heat transfer. The hot runner heaters are annealed to acquire malleability for bending into any shape. Injection molding coil heaters with thermocouple are also available.
Specification:
1. Hot runner heater also know as cable heaters can be formed to a
variety of shapes as required by its many application.
2.Usually,coil heaters are configured as small diameter,high
performance nozzle heaters that are fully annealed.
3.Coil heates are use on injection molding machine nozzles and
sprue bushings supplying bushings supplying 360 degree of heat with
optional distributed wattage available.
4.Coil heaters are also used as cartridge heaters where irregular
size bores are found.A straight,round cable heater can snake
through a seal in packaging equipment installations.
Name | Hot Runner Heater |
Sheath Material | SUS 304/316/321, Incone 800,etc |
Insulation | High pure Mgo |
Inner Heating Element | 20MM-1200MM |
Maximum Temperature | +1000℃ |
Staright Style Length | 200-3000MM |
Resistance Tolerance | 2%-5% |
Wattage | 200-3000W |
Built-in Thermocouple | J / K type thermocouple |
