|
[China]
Trade Verify
Address: 2303 Century Square , Zhongnan Road , Wuhan ,China
Contact name:Frank
Wuhan Global Metal Engineering Co., Ltd |
|
Verified Suppliers
|
|
|
Industial Elctric Heaters for Injection Mold Hot Runner System
1. Industial Electric Heaters Brief Introduction
Wuhan Global Metal hot runner coil heater use Germany heater wire,
United States high-purity magnesium oxide material, and strict
process technology. There are various cross section and size
for choice, such as square, round and flat, provide
high-performance electric heater for heating hot runner mold and
other fields.
Heater maximum temperature up to 650 ºC, the integration of
temperature thermocouple for the precise temperature control, can
provide K, J, E thermocouple, blasting and blackening surface
treatment, also can provide bright surface.
2. Industrial Electric Heaters Characteristics
3. Industrial Electric Heaters Application
4. Industrial Electric Heaters Parameter.
Spring coil heater (H series) | 3.0x3.0 | Φ3.0 | Φ4.0 | Φ5.0 | 3.5x3.5 | 5.0x5.0 |
Voltage | 220V,230V,240V | |||||
Power tolerance 115W-200W | +/-10% | |||||
Power tolerance 201W-2000W | +5%-10% | |||||
Out jacket length | 30mm~280mm | |||||
Diameter of the inner sleeve/wrapped diameter | 10mm~42mm | |||||
Unheating length | 45mm | |||||
Max power density | 9W/cm² | |||||
Heating Length tolerance | +/-0.05mm | |||||
Unheating length tolerance | +/-2.5% | |||||
Tolerance ID d ≤20mm | Without inner sleeve:-0.15mm | |||||
Tolerance ID d 20mm~30mm | Without inner sleeve:-0.20mm | |||||
Tolerance ID d ≥30mm | Without inner sleeve:-0.25mm | |||||
Tolerance cross section | +/-0.15mm | +/-0.20mm | ||||
Thermocouple | K,J,E | None | ||||
Material | 304,321,316 | |||||
Maximum working temperature | 650℃ | |||||
Die electrical strength | 800V | 1000V | ||||
5. Packing Information
6. Transportation
