Home Companies Wuhan Global Metal Engineering Co., Ltd

Portable Thermocouple RTD , Screw Type Silicon 3 Wire Pt100 Temperature Sensor RTD

Wuhan Global Metal Engineering Co., Ltd

Contact Us

[China] country

Trade Verify

Address: 2303 Century Square , Zhongnan Road , Wuhan ,China

Contact name:Frank

Inquir Now

Wuhan Global Metal Engineering Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Portable Thermocouple RTD , Screw Type Silicon 3 Wire Pt100 Temperature Sensor RTD

Country/Region china
City & Province wuhan hubei
InquireNow

Product Details

Screw Type RTD Pt100 Temperature Sensor With Silicon Wire

 

Product  Description:


Resistance temperature detectors (RTD) accurately sense temperature with an excellent degree of repeatability and interchangeability of elements. The RTD is composed of certain metallic elements whose change in resistance is a function of temperature. In operation, a small excitation current is passed across the element, and the voltage, which is proportional to resistance, is then measured and converted to units of temperature calibration. The RTD element is manufactured by winding a wire (wire wound elements) or plating a film (thin film elements) on a ceramic or glass core and sealing the element within a ceramic or glass capsule.
Since most RTDs have a low initial resistance, often 100 ohms, and have a small change in resistance per unit of temperature range, the resistance of the lead wire is often compensated for with a three or four wire bridge configuration built into the measuring devices. By selecting the proper elements and protective sheathing, RTDs can operate in a temperature range of (-200 to 650) °C [-328 to 1202] °F.

 

Specification:

 

Probe Outside Diameter

3mm, 4mm, 5mm,6mm

RTD Element Type

1xPt100

2xPt100

1xPt1000

2xPt1000

RTD wire connection

2 wire configuration

3 wire configuration

4 wire configuration

 

Wire Description

24 Gage Stranded Stainless Steel Braid

Flexible Armor Cable

24 Gage Stranded Fiberglass Cable

24 Gage Stranded Cable

Termination type

90mm split leads and Bare Ends.

90mm split leads and spade lugs.

Standard Male Plug (2 & 3 wire configuration only)

Standard Female Jack(2 & 3 wire configuration only)

Mini Male Plug(2 & 3 wire configuration only)

Mini Female Jack(2 & 3 wire configuration only)

 

 

Feature: 

 

1. Assembly simply and change easily;
2. Pressure spring type temperature sensor element,good shake-proof;
3. Wide measurement range;
4. High mechanical strength;
5. Excellent pressure resistance


Application:


It is widely used in power industry, food industry, atomic industry, petroleum industry, pharmaceutical 
Industry etc. And it is usually cooperated with display meter, recording meter and electronic computer etc. 
It can measure directly the temperature of the mediums as liquid, steam, gas and of solid surface 
Ranging from -200° C to 600° C during the production.

 

Hot Products

Coil and Cable Heaters with Thermocouple J 1. Coil Heater Brief Introduction Hot runner heater is an ...
Injection Mold Micro Tubular Heaters with J Thermocouple 1. Brief Introduction Micro Tubular Coil ...
Coil Heater for Hot Runner Stainless Steel Sleeves 1. Brief Introduction Coil Heater for Hot Runner, ...
Axial Clamp Mini Coil Heater With Thermocouple On The Nozzle 240V / 268W Description Axial clamp ...
Axial Clamp Mini Coil Heater Without Thermocouple On The Nozzle 240V / 268W Description Axial clamp ...
PVC Insulated 16 BWG J Type Thermocouple Extension Cable 1. Introduction Thermocouple extension ...