|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
PCB Clamps Rejection 3AG Glass Fuse Holder Clips FS-601 For 6x30mm Ceramic Cartridge Fuse
Function Of The Fuse Holder Clips
The fuse clip is a clip of the fuse. It is an electrical element installed in the circuit that can ensure the safe operation of the circuit. It can also be divided into a current fuse clip and a car fuse clip. When there is a problem with the circuit, the current will continue to rise, which may damage the important devices in the circuit, or it may burn the circuit or even cause fire. If the fuse is installed correctly through the fuse clip in the circuit, at this time, when the current is abnormal to a certain height and a certain time, the fuse will be disconnected to cut off the current, so as to keep the circuit safe and smooth.
The fuse clip fingers the fuse clip, which can be divided into: current fuse clip and car fuse clip. Generally, there are three surface plating layers: nickel -plated, tin plating, and silver plating. Fuse fuse, large car fuse clip. It is mostly used to install it on the line board, and it can be replaced better by using it for future fuse burning. The fuse should be considered in the following factors: selection according to the size of the fuse, the size of the current, and the size of the lineboard design and installation position.
The fuse is generally composed of three parts: one is the melt part, which is the core of the fuse, which plays a role of cutting the current during the melting; the other is the electrode part, usually there are two. There must be good conductivity, and obvious installation contact resistance should not be generated; third, the bracket part, the fuse of the fuse is generally slender and soft, the function of the bracket is to fix the melt and make the three parts the overall installation of the rigidity. Use, it must have good mechanical strength, insulation, heat resistance, and flame retardability, and should not occur during use.
The fuse clip is a auxiliary device of the fuse. In some special circuits, such as using a fuse clip on the car for assistance, the installation and replacement of the fuse will be more convenient.
Main business Of The Fuse Holder Clips
Fuses, fuses, self -recovery fuses, patch fuses, temperature fuses, micro fuses, welded fuses, wire beam fuse seats, fuse pipe seats, installation fuse seats, medium -sized car fuse seats, PC board welding fuse seat seats , Insert a piece of fuse seat, cable beam car fuse, car fuse seat, Dongguan fuse, Guangdong fuse
| The fuse clip fingers the fuse clip, which can be divided into: | current fuse clip and car fuse clip. |
| Classification of current fuse clamps: | 3*10mm, 5*20mm, 6*30mm; |
| Automobile fuse clamping: | small car fuse clip, medium car fuse clip, large car fuse clip. |
| There are generally three surface plating layers: | nickel -plated, tin -plated, and silver plating. However, the current domestic manufacturers basically use brass, because brass is the best metal material for conductive electricity, not only the use of fuse clamps, but other electronic components are often used as conductive materials. |
Dimension Of The Fuse Holder Clips
Fuse Clip Types
