|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Limitor Fuse Thermal Cut-Off TCO Y35 130C 20A 250V For Fan Heaters Transformers
Description Of The Thermal Cut-Off TCO
The temperature fuse is also called the hot-melt broken body (the national standard GB9816.1-2013), which is a temperature sensing circuit cutting device. Temperature fuse can induced excessive heat generated in the normal operation of electrical electrical products, thereby cutting off the circuit to avoid the occurrence of fires. Commonly used: hair dryers, electric iron, rice cookers, electric furnaces, transformers, electric motors, water dispensers, coffee pots, etc. The temperature fuse cannot be used again after operating, only once at the fuse temperature.
Temperature ratings Of The Thermal Cut-Off TCO
73 degrees 99 degrees 77 degrees 94 degrees 113 degrees 133 degrees 142 degrees 157 degrees 172 degrees 216 degrees 227 degrees, 240 degrees 77 degrees, 84 degrees 92 degrees, 95 degrees, 115 degrees, 115 degrees 128 degrees, 128 degrees 130 degrees 139 degrees 141 degrees 144 degrees 157 degrees 169 degrees 184 degrees 185 degrees 192 degrees 227 degrees 228 degrees 240 degrees 280 degrees 280 degrees 320 degrees.
The following matters are to ensure that the normal operation of the thermometer must be followed
| i) | The temperature fuses have rated current and voltage, fuse temperature (TF), use temperature (TH), and maximum temperature (TM) shall be used under the specified parameters. |
| II) | When selecting the fuse installation position, be careful not to pass the stress on the fuse due to the vibration in the finished product and the variable position of other accessories. |
| III) | The temperature will not rise after the temperature fuse is melted to the place where the temperature is above the maximum temperature. |
| IV) | cannot be used for liquid or humidity in machines with more than 95%. |
| v) | The temperature fuse should be installed in a place with the heating source that can only be sensing. When the structure is inevitable, set the thermal partition. For example |
| vi) | In order to increase the current of the temperature fuse, connect or continuously pass the current and over -voltage, the internal contact of the temperature fuse will be damaged, which will affect its normal movement. Therefore, it cannot be used under the above conditions. |
Benefits Of The Thermal Cut-Off TCO
- Small compact design
- Broad product line
- Dust-proof design
- Customer-specific design
Applications Of The Thermal Cut-Off TCO
- Household appliances
- Electronic appliances
- Fan heaters
- Transformers
- Automotive industry
