|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Car Audio 5AG AGU BLF SPF C10 PV1000 10x38mm In-Line Fuse Holder With Mounting Clip
Description Of The 10x38mm In-Line Fuse Holder
522 In-Line Fuseholders designed for Car Audio Accy. & Power Dist. Block,it is suitable for UL & CSA 248-14 approved Normal Blow 5AG AGU BLF SPF C10 PV1000 glass tube fuse 10.30 x 38.1mm ( 13/32 x 1-1/2 inch) Ampere Rating: 10-80A Voltage Rating: 32V DC with clear P.C and different contacts(Zn-Sn alloy with Gold plated,Nickel Plated or Other material plating upon customer request.),Note: Connecting wire available range #8 and #4 With #8 wire rated current Max. 40A With #4 wire rated current Max. 90A Ref standard:SAE J1428.
Features Of The 10x38mm In-Line Fuse Holder
* Unique See-Thru Material
* Clear Housing With Mounting Clip
* All Metal Parts Are 24 Kt. Gold Finish
* Accept AGU Fuse Up To 80 Amps
* Gold tone plated finish for superior corrosion resistance.
* Pre-drilled holes for easy installation.
* Application for most cars.
* Perfect Fit For 4/8 Gauge Power Cable
* Set Screw Design-No Crimping Required
Application Of The 10x38mm In-Line Fuse Holder
* An in-line automotive fuse holder with heat insulation, pressure
resistance and high temperature resistance, wire terminals can
accept 4/6/8 gauge wires.
* Ideal for custom protection circuits or to replace an existing
defective one.
* The fuse holder is used to protect cars and passengers from
large-scale short circuits that may be caused by traffic accidents
or wiring problems.
* Fuse holder must always be fitted at the battery end of the amplifier power supply,to protect the car and passengers from a massive short circuit that would be caused in a vehicle accident or by a wiring problem
* Ideal for Car Alarm fitters, Audio installers, Auto electricians and Diy use
Specifications Of The 10x38mm In-Line Fuse Holder
| P/N: | JEF-522B |
| Applicable for : | AGU (5AG) Fuse |
| Electrical: | Max. 80A 32V |
| Insulation Body: | Clear P.C |
| Contacts: | Zn-Sn alloy with Gold plated,Nickel Plated or Other material plating upon customer request. |
| Note: | Connecting wire available range #8 and #4 With #8 wire rated current Max. 40A With #4 wire rated current Max. 90A |
| Ref standard: | SAE J1428 |
| P/N: | JEF-522C |
| Applicable for : | AGU (5AG) Fuse |
| Electrical: | Max. 80A 32V |
| Insulation Body: | Clear P.C |
| Contacts: | Zn-Sn alloy / Brass with Gold plated,Nickel Plated or Other material plating upon customer request. |
| Note: | Connecting wire available range #8 and #4 With #8 wire rated current Max. 40A With #4 wire rated current Max. 90A |
| Ref standard: | SAE J1428 |
| P/N: | JEF-522K |
| Applicable for : | AGU (5AG) Fuse |
| Electrical: | Max. 80A 32V |
| Insulation Body: | Clear P.C |
| Contacts: | Zn-Sn alloy with Gold plated,Nickel Plated or Other material plating upon customer request. |
| Note: | Connecting wire available range #8 and #4 With #8 wire rated current Max. 40A With #4 wire rated current Max. 90A |
| Ref standard: | SAE J1428 |
What does AGU stand for in fuses?
Originally AGU stood for “all glass.” The automotive industry uses the “AG” prefix (AGC, AGW) for most glass fuses. They vary in length, diameter and amperage rating.
What size is an AGU Fuse?
AGU Fuses: The largest fuse is the glass AGU fuse which
measures 10x38mm. These fuses are available in current ratings
between 10 and 80 amps. AGU fuses can be used to protect the main
power wire of small to moderately high power systems.
