Dongguan Ampfort Electronics Co., Ltd. |
Verified Suppliers
|
|
Zinc Alloy Low Profile Micro Auto Blade Fuse 32VDC Glow Blow With LED Indicator
Description Of The Low Profile Micro Auto Blade Fuse 32VDC Glow Blow With LED Indicator
Compared with standard low profile micro auto fuse, ATT with LED indicator and it can be found to be blown once light turn off , it is easy to be found and replaced. Standard model without LED can be found to be blown only when whole circuit stopped working for a whle.
Overview Of The Low Profile Micro Auto Blade Fuse 32VDC Glow Blow With LED Indicator
* Item: LED FUSE/ Photo Fuse/Low Profile Mini BladeFuse/ Car Truck
Fuse Automotive Replacement Fuse
* Ampere(A): 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A
* Application: It's available for cars, boats,marine, trucks, RVs, Circle, Drag, off-road, equipment and wiring accessoriesetc.
* Features :It's an excellent wiring solution forautomotive and marine wiring application. LED Light makes the top glow when thefuse is blown. Industry-standard color-coding.
Main Parameters Of The Low Profile Micro Auto Blade Fuse 32VDC Glow Blow With LED Indicator
* Low Profile Mini Blade Type Automotive Fuse
* Body Material: PC Polycarbonate
* Metal Material : Zinc Alloy
* Indicator: LED
* Interrupting: 1000A@32VDC
* Voltage Rating: 32VDC
* Ambient Temp: -45℃~+85℃
Dimension Of The Low Profile Micro Auto Blade Fuse 32VDC Glow Blow With LED Indicator
Time-Current Chararteristics Of The Low Profile Micro Auto Blade Fuse 32VDC Glow Blow With LED Indicator
% Of Ampere Rating | Opening Time |
100% | 100 hours Min |
135% | 0.75 sec.Min; 1800 sec.Max |
200% | 0.15 sec.Min; 5 sec.Max |
350% | 0.08 sec.Min; 0.25 sec.Max |
600% | 0.03 sec.Min; 0.1 sec.Max |
Current Color Table Of The Low Profile Micro Auto Blade Fuse 32VDC Glow Blow With LED Indicator
Part Number | Amperage | Body Color |
ATT-2A | 2A | Gray |
ATT-3A | 3A | Violet |
ATT-4A | 4A | Pink |
ATT-5A | 5A | Tan |
ATT-7.5A | 7.5A | Brown |
ATT-10A | 10A | Red |
ATT-15A | 15A | Blue |
ATT-20A | 20A | Yellow |
ATT-25A | 25A | Natural |
ATT-30A | 30A | Green |
LED Indicator Fuses for All 12 Volt Vehicles
A fuse is designed to protect an electrical circuit against damage
caused by overloads and short circuits. Under these circumstances,
the fuse “blows” to cut the flow of current—that is, a thin metal
wire or strip is destroyed by the errant electricity. In most
cases, the only way to see if a fuse is blown is by visual
inspection of this metal element.
Almost every vehicle on the road today uses blade fuses to
safeguard its many electrical systems. These fuses are all located
in a single block, sometimes referred to as the vehicles “power
distribution center.” A vehicle’s power distribution center is not
always easily accessible, and this, coupled with the need to
visually check a fuse element, can make it difficult to find and
replace a blown fuse. Unless you know exactly which fuse goes to
what in your vehicle, trial and error—pulling each fuse and
checking its element—is often the only way to find the culprit.
AMPFORT LED indicator fuses feature small LED bulbs that illuminate
when a fuse has blown, making it far easier to identify, remove,
and replace. Our MidBlade ATO/ATC LED indicator replacement fuses
and MinBlade ATM LED indicator replacement fuses are designed to
replace ATO/ATC fuses and ATM fuses. They offer the same fit and
electrical circuit protection as those “standard” fuses, and add
the convenience of high-visibility LED lights for open circuit
identification.