Ethernet Cat5e Shielded Cable Connector RJ45 Modular Plug Jack Socket 8P8C 8 Position With 120 Ohm Resistor

Ethernet Cat5e Shielded Cable Connector RJ45 Modular Plug Jack Socket 8P8C 8 Position With 120 Ohm Resistor

Crystal head is a plastic connector that can insert into a fixed direction and automatically prevent falling off. It is commonly known as "Crystal Head". The professional terms are RJ-45 connectors (RJ-45 is a network interface specification, similar to RJ-11 11 The interface is the "telephone interface" we usually use to connect to the phone line). It calls it "crystal head" because its appearance is clear and translucent. The crystal head is suitable for the on -site end -end of the equipment or the horizontal subsystem. The shell material uses high -density polyethylene. Each ends of each twisted wire are connected to the network card and the hub (or switch) by installing the crystal head.Type as below:

CAT3 Modular Plug

CAT5E Modular Plug

CAT6 Modular Plug

CAT6A Modular Plug

CAT7 Modular Plug

Modular Plug Accessories : Customize&PCB Modular Plug, Modular Plug Boots

1) Executive standard:ISO/IEC 11801 D, ANSI/TIA/EIA 568 A | B , IEC 60603-7-3:2010

2) Mainly used to connect to the network card port, hub, switch, telephone, etc.

3) Use cross -line connection between the same type of equipment, and the direct line connection between different types of devices is used;

4) The router and PC belong to the DTE type device, and the switch and HUB belong to the DCE type device;

5) The RJ45 network connector generally has two standard methods: 568A and 568B. According to the same standard, the direct line, different standards, the cross line.

6)RJ-45 connector: Each end of the twisted wire is connected to the network card and hub (or switch) by installing the RJ-45 connector (commonly known as crystal head).

7) The RJ-45 plug is a plastic connector that can only be inserted in a fixed direction and automatically prevent falling off. The two ends of the twisted lines must be installed with this RJ-45 plug in order to insert on the network card (NIC), hub (HUB) or The switch (Switch )'s RJ-45 interface is conducted on network communication.

1.Performance Specification

• Current Rating, maximum
  1.5A
• Insulation Resistance, minimum
  500 mOhm
• Safety Voltage Rating
  150 Vac
• Operating Temperature
  -10℃~60℃(+14F~+140F)
   
   
• Conductor Gauge
  26-24 AWG
• Contact Base Material
  Phosphor bronze/Copper
• Contact Plating Material
  Gold
• Contact Plating Thickness
  1.27μm(50U)
• Material Type
  polycarbonate UL 94-V0/V2
• Plug Insertion Life, minimum
  750 times
• Plug Shield Base Material
  0.2mm Copper Alloy Gold Plating
• ANSI/TIA Category
  5e
• Color
  transparent

8P8C PLUG,CAT.6,W/INSERT,W/O SHIELD ;8P8C PLUG,CAT.6,W/INSERT,W/ SHIELD;
8P8C PLUG,CAT.6,W/O INSERT,W/O SHIELD;8P8C PLUG,CAT.6,W/O INSERT,W/ SHIELD;
8P8C PLUG,CAT.6 A TYPE,W/INSERT,W/O SHIELD;8P8C PLUG,CAT.6,W/INSERT,W/ SHIELD;
8P8C PLUG,CAT.5,W/O SHIELD;8P8C PLUG,CAT.5,W/ SHIELD;8P8C PLUG,CAT.5,THREE PRONGS;
6P6C PLUG , 4P4C PLUG , UK 6P6C PLUG , 10P10C PLUG,CAT.5