|
[China]
Trade Verify
Address: Building B8, Industry District Ⅱ, Xicheng, Hengli Township, Dongguan City, Guangdong Province, China
Contact name:Dana
Dongguan Ziitek Electronical Material and Technology Ltd. |
|
Verified Suppliers
|
|
|
China manufacturer high thermal conductivity 12W gray silicone thermal pad
Company Profile
Ziitek Electronic Material and Technology Ltd. provides product solutions to equipment product which generates too much heat affecting its high performance when using. Plus thermal products can control and manage heat to keep it cool to some extent,can Ziitek provide thermal conductive gap fillers, low melting point thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products and so on, for various applications.
The TIF830HP thermally conductive interface materials are applied to fill the air gaps between the heating elements and the heat dissipation fins or the metal base. The viscoelastic nature of the material also gives excellent low-stress vibration dampening and shock absorbing characteristics. Ziitek TIF830HP is an electrically isolating material, which allows its use in applications requiring isolation between heat sinks and high-voltage, bare-leaded devices.
Features
| Available in varies thicknesses |
| Broad range of hardnesses available |
| Moldability for complex parts |
| Outstanding thermal performance |
| High tack surface reduces contact resistance |
Applications
| Automotive engine control units |
| Telecommunication hardware |
| Handheld portable electronics |
| Semiconductor automated test equipment (ATE) |
| CPU |
| display card |
| mainboard/mother board |
| notebook |
| power supply |
Typical
Properties of TIF830HP Series | ||||
Color | Gray | Visual | Composite Thickness | Thermal Impedance @10psi (℃-in²/W) |
Construction & Compostion | Ceramic filled silicone elastomer | *** | 10mils / 0.254 mm | 0.16 |
20mils / 0.508 mm | 0.20 | |||
Density(g/cm3) | 3.55 | ASTM D297 | 30mils / 0.762 mm | 0.31 |
40mils / 1.016 mm | 0.36 | |||
Hardness(Shore00 ＜0.75mm) | 65 | ASTM C351 | 50mils / 1.270 mm | 0.42 |
60mils / 1.524 mm | 0.48 | |||
Hardness(Shore00 ≥0.75mm) | 40 | ASTM 2240 | 70mils / 1.778 mm | 0.53 |
80mils / 2.032 mm | 0.63 | |||
Thickness range | 0.030”-0.200” | ASTM D412 | 90mils / 2.286 mm | 0.73 |
100mils / 2.540 mm | 0.81 | |||
Continuos Use Temp | -40 to 160℃ | *** | 110mils / 2.794 mm | 0.86 |
120mils / 3.048 mm | 0.93 | |||
Dielectric Breakdown Voltage | >5500 VAC | ASTM D149 | 130mils / 3.302mm | 1.00 |
140mils /3.556 mm | 1.08 | |||
Dielectric Constant | 4.5 MHz | ASTM D150 | 150mils / 3.810 mm | 1.13 |
160mils / 4.064 mm | 1.20 | |||
Volume Resistivity | 1.0X1012 Ohm-meter | ASTM D257 | 170mils / 4.318 mm | 1.24 |
180mils / 4.572 mm | 1.32 | |||
Fire rating | 94 V0 | equivalent UL | 190mils / 4.826 mm | 1.41 |
200mils / 5.080 mm | 1.52 | |||
Thermal conductivity | 12 W/m-K | ASTM D5470 | Visua l/ ASTM D751 | ASTM D5470 |
Standard Thicknesses:
0.010" (0.25mm) 0.020" (0.51mm) 0.030" (0.76mm) 0.040" (1.02mm)
0.050" (1.27mm) 0.060" (1.52mm) 0.070" (1.78mm) 0.080" (2.03mm)
0.090" (2.29mm) 0.100" (2.54mm) 0.110" (2.79mm) 0.120" (3.05mm)
0.130" (3.30mm) 0.140" (3.56mm) 0.150" (3.81mm) 0.160" (4.06mm)
0.170" (4.32mm) 0.180" (4.57mm) 0.190" (4.83mm) 0.200" (5.08mm)
Consult the factory alternate thickness.
Standard Sheets Sizes:
8" x 16"(203mm x 406mm) 16" x 18"(406mm x 457mm)
TIF™ series Individual die cut shapes can be supplied.
Peressure Sensitive Adhesive:
Request adhesive on one side with "A1" suffix.
Request adhesive on double side with "A2" suffix.
Reinforcement:
TIF™ series sheets type can add with fiberglass reinforced.
Our services
Online-service : 12 hours , Inquiry reply within fastest.
Working time: 8:00am - 5:30pm, Monday to Saturday (UTC+8).
Well-trained & experienced staff are to answer all your inquiries in English of course.
Standard Export Carton Or Marked With Customer's Information Or Customized.
Provide free samples
After-service: Even our products have passed strict inspection, if you find the parts can not work well, please show us the proof.
we will help you to deal with it and give you satisfactory solution.
Q: Do you accept custom orders ?
A:Yes , welcome to custom orders. Our custom elements including dimension , shape , color and coated on side or two sides adhesive or coated fiberglass. If you want to place a custom order , pls kindly offer a drawing or leave your custom order information .
Q: How much are the pads?
A: Price is depended on your size, thickness, quantity, and other requirements, such as adhesive and others. Please let us know these factors first so that we could give you an exact price.
