Active Member
|
[China]
Address: Xinhua Cun, Chunjiang Town, New-north District, Changzhou, Jiangsu China PRC 213000
Contact name:Wendy zhang
Jiangsu ChangSheng Electric Appliance Co., Ltd |
|
|
Automotive 17AM-D Bimetal Thermal Protector For Motor With Snap–Action Disc
Specifications
Normally close, open on temperature rise, automatic reset | |
Contact capacity | 125Vac/16A, 250Vac/8A 600Vac/4A 24Vdc/20A |
Cycles life | 6,000-10,000cycles |
Open temperature | 50°C to 160°C in increments of 5°C |
Temperature Tolerance | ±5°C |
Differential Temperature | depending on open temperature |
Seal | High-seal and low-seal gasket material available |
Contact resistance | ≤100 mW |
Insulation resistance | The resistance between the leads and insulation sleeve is >100 M with 500 VDC at 25 °C. |
Applications:
Description:
17AM-D is a thermally operated snap-action device which delivers the over heat protection with advanced structure, high contact capacity and long cycle life. The operating principle of the 17AM-D is both simple and effective. At the heart of the proctor is a bimetal snap–action disc. When the temperature of this disc reaches its pre-calibrated temperature it snaps open, resulting in an open circuit. This temperature is reached during a fault condition, caused by either an increase in ambient temperature, an increase in current flowing through the discs, or a combination of both. After the 17AM-D breaks the circuit, the system cools and the 17AM-D automatically resets, allowing power to be restored to the circuit.
Competitive Advantage
1. The strongest Chinese manufacturer, TS16949 and ISO14001 recognized. |
2. Compact, miniature size. |
3. UL,VDE,CE CQC Approved. |
4. Individually temperature checked on modern, custom-designed equipments from Japan. |
5. Snap–action disc |
6. Gasketed steel case suitable for most impregnation processes |
7. Professional solutions with wide selection of leads and insulating sleeves |
8. Bimetal discs carry circuit current, so it is current and temperature double sensitivity for maximum design flexibility and application |
