|
[China]
Trade Verify
Address: Building 6-1, Woer Industrial Zone, No.53, Longtian Street, Pingshan District, Shenzhen, China
Contact name:Subby
Cyg Tefa Co., Ltd. |
|
Verified Suppliers
|
|
|
Flexible Insulation Pe Xpe Foam Heat Resistant Roof Material
Electronic cross-linked polyethylene foam also named Physical
crosslinked polyethyele foam, Irradiation crosslinked polyethylene
foam.Common abbreviations IXPE foam, IXLPE foam.It is made of
low-density polyethylene (LDPE), AC foaming agent and other powders
after being melted, mixed and extruded, and then foamed at high
temperature. IXPE has finer cells, smoother surface and better
mechanical properties than XPE.
Production process: compounding-extrusion-irradiation-foaming.
Note: IXPE foam can be made anti-static (we will talk about
anti-static IXPE later), but XPE cannot (theoretically it is
possible, but our company does not currently produce).
1. Excellent heat insulation performance: Low thermal conductivity,
<0.040W/m · K, less than polystyrene, similar to polyurethane,
as the excellent insulation, heat insulation materials;
2. High apparent density: Apparent density reachs to 28± 2kg/m ³ ,
superior to polyurethane and phenolic foam; Reduces the building's
weight, load of the building and cost of the structure. Also easy
and fast to construct, and improve efficiency;
3. Qualified combustion performance: Combustion performance reach
the B2 level of building and decoration material class, the same as
polystyrene;
4. Good corrosion resistance and ageing resistance: Resistance to
acid and organic solvents, long-term exposure to the Sun, minor
aging, special anti-aging treatment but can be done;
5. Superior production technology to meet different needs:
Continuous and controllable production process meets different
requirements of the length and width, effectively reducing the
waste during transportation and installation.
Specification
| ||||
| Property | Standard | Unit | Value | |
| Density | - | Kg/m³ | 50.00 | |
| Tensile Strength | Transverse | ISO-1798 | MPa | 0.33~0.36 |
| Longitudinal | 0.48~0.50 | |||
| Elongation | Transverse | ISO-1798 | % | 95.20~102.10 |
| Longitudinal | 100.20~109.10 | |||
| Tearing Strength | Transverse | ISO-8067
| Kn/m | 1.97~2.14 |
| Longitudinal | 2.48~2.71 | |||
| Compression 25% | ISO-3386-1 | kPa | 58.00 | |
| Compression 40% | ISO-3386-1 | kPa | 95.60 | |
| Compression 50% | ISO-3386-1 | kPa | 132.00 | |
| Compression Set 25% 0.5H | ISO-1856 | % | 13.22 | |
| Compression Set 25% 24H | ISO-1856 | % | 4.68 | |
| Operating Temperature Range | Internal | °C | (-40,+80) | |
| Water Absorption % Volume (Maximum) | Internal | % | 0.40 | |
| Thermal Conductivity | JIS A1412-2 | W/mK | 0.055 | |
| Shore - C | ASTM D2240 | °C | 30 | |
| Flammability | FMVSS302 | mm/min | - | |
Additional Information
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 4mm thick specimen and should be considered as guidelines only.
Our Services
CYG TEFA offers the best solution for polyethylene foam production based on long experience in the developing ,manufacturing PE foam.All the service are focused on quality of products and satisfied our customer.
CYG TEFA stocks many different types of foam with the following special properties:
Adhesive
Anti-Microbial
Anti-Static (A/S)
Conductive
Electrostatic Dissipative (ESD)
Fire Retardant (FR)
Company Information
CYG TEFA is the earliest PE foam manufacturing with scale production in China since 2002.Mainly produce XPE FOAM,IXPE FOAM,IXPP FOAM and ESD PRODUCT(Foam type: PE/EVA/PU/EPE/PP Plastic).Annual production capacity is about 6000 tons.2 bases one in Shen zhen and an other in Huzhou,with total 17 production lines.CYG Management control system: Kingdee / OA / Oracle.CYG have a professional team and technology.More than 30 R&D staff.Through the great variety of our products we provide people with a warm and quiet home and working environment.
FAQ
What is PE foam?
A: Polyethylene foam is a strong, resilient closed-cell foam.
Ideally foam material suited as the material or part of a material
required in products requiring a shock absorbing, vibration
dampening, insulation, barrier or buoyancy component etc.
Why choose Low-density polyethylene foam?
A:Low-density polyethylene foam has numerous applications because of its many desirable properties including water-resistance, chemical resistance, energy-absorbance, buoyancy and cushioning characteristics. Compressive strength is greater in denser foams, decreasing as density decreases. Low-density foams tend to exhibit more compressive creep, meaning they become less thick over time, than higher-density foams.
How can I know the suitable foam density I need?
A:Our PE foam density is between 25 kg/m3 and 240 kg/m3
We can provide the best solution for you according the
application,Density,hardness,thickness.And The free sample is
available for your confirm and text
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (ABC bank) and Paypal, Western Union are the most usual ways we are using for freight fees of PE foam samples.
