|
[China]
Trade Verify
Address: Building 6-1, Woer Industrial Zone, No.53, Longtian Street, Pingshan District, Shenzhen, China
Contact name:Subby
Cyg Tefa Co., Ltd. |
|
Verified Suppliers
|
|
|
| ||||
| Property | Standard | Unit | Value | |
| Density | - | Kg/m³ | 33.33 | |
| Tensile Strength | Transverse | ISO-1798 | MPa | 0.39~0.41 |
| Longitudinal | 0.23~0.28 | |||
| Tearing Strength | Transverse | ISO-8067
| Kn/m | 1.84~2.26 |
| Longitudinal | 1.32~1.40 | |||
| Compression 25% | ISO-3386-1 | kPa | 36.80 | |
| Compression 45% | ISO-3386-1 | kPa | 66.70 | |
| Compression 50% | ISO-3386-1 | kPa | 96.90 | |
| Compression Set 25% 0.5H | ISO-1856 | % | 15.80 | |
| Compression Set 25% 24H | ISO-1856 | % | 5.80 | |
| Operating Temperature Range | Internal | °C | (-40,+80) | |
| Water Absorption % Volume (Maximum) | Internal | % | 0.50 | |
| Thermal Conductivity | JIS A1412-2 | W/mK | 0.040 | |
| Shore - C | ASTM D2240 | °C | 23 | |
| Flammability | FMVSS302 | mm/min | - | |
Additional Information
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 15mm thick specimen and should be considered as guidelines only.
● Processing method by eletronic heating.
● 12 kg/100m2 glue.
1. Excellent heat insulation performance: Low thermal conductivity,
<0.040W/m · K, less than polystyrene, similar to polyurethane,
as the excellent insulation, heat insulation materials;
2. High apparent density: Apparent density reachs to 28± 2kg/m ³ ,
superior to polyurethane and phenolic foam; Reduces the building's
weight, load of the building and cost of the structure. Also easy
and fast to construct, and improve efficiency;
3. Qualified combustion performance: Combustion performance reach
the B2 level of building and decoration material class, the same as
polystyrene;
4. Good corrosion resistance and ageing resistance: Resistance to
acid and organic solvents, long-term exposure to the Sun, minor
aging, special anti-aging treatment but can be done;
5. Superior production technology to meet different needs:
Continuous and controllable production process meets different
requirements of the length and width, effectively reducing the
waste during transportation and installation.
Company info
CYG TEFA Co., Ltd, a national high-tech company, established in
December of 2002. Now we have 2 production bases in Shenzhen,
Hangzhou, with annual production capacity of 6000 tons;
We are the leading manufacturer for XPE , IXPE foam,ESD foam for
more than 17 years, all our products can be used for thermal
insulation,waterproof,shockproof,etc. and also our products get the
UL, ISO, SGS, Rohs, Reach , CE approval. and we have 17 production
lines for production.Hope to cooperate with you.
IXPP project (three years: Proposal stage - Develop - Sampling - Approved product- Small quantity supply for testing
11 employee
Investment rate: 4% to 10%
Responsible for : Improving available product / Technology
improving / New product development / New devices.
.
