|
[China]
Trade Verify
Address: Building 6-1, Woer Industrial Zone, No.53, Longtian Street, Pingshan District, Shenzhen, China
Contact name:Subby
Cyg Tefa Co., Ltd. |
|
Verified Suppliers
|
|
|
| ||||
| Property | Standard | Unit | Value | |
| Density | - | Kg/m³ | 33.33 | |
| Tensile Strength | Transverse | ISO-1798 | MPa | 0.39~0.41 |
| Longitudinal | 0.23~0.28 | |||
| Tearing Strength | Transverse | ISO-8067
| Kn/m | 1.84~2.26 |
| Longitudinal | 1.32~1.40 | |||
| Compression 25% | ISO-3386-1 | kPa | 36.80 | |
| Compression 45% | ISO-3386-1 | kPa | 66.70 | |
| Compression 50% | ISO-3386-1 | kPa | 96.90 | |
| Compression Set 25% 0.5H | ISO-1856 | % | 15.80 | |
| Compression Set 25% 24H | ISO-1856 | % | 5.80 | |
| Operating Temperature Range | Internal | °C | (-40,+80) | |
| Water Absorption % Volume (Maximum) | Internal | % | 0.50 | |
| Thermal Conductivity | JIS A1412-2 | W/mK | 0.040 | |
| Shore - C | ASTM D2240 | °C | 23 | |
| Flammability | FMVSS302 | mm/min | - | |
Additional Information
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 15mm thick specimen and should be considered as guidelines only.
● Processing method by eletronic heating.
● 12 kg/100m2 glue.
CYG Insulation foam is a flexible thermal insulation material
made from closed cell, cross-linked polyethylene foam. The special
cross-linking utilized in the production of the material, as well
as, its closed cell structure, results in insulating properties
that are superior to fiberglass, rubber based and non
cross-linked products.
A very low thermal conductivity value(K), and negligible water
absorption and vapour transmission rates reflect in its superior
energy saving performance, in variety of environments.
1. excellent heat insulation performance:
low thermal conductivity, <0.040W/m · k, less than polystyrene,
similar to polyurethane, as the excellent insulation, heat
insulation materials;
2. high apparent density:
apparent density reach to 28±2kg/m ³,superior to polyurethane and phenolic foam; reduces the building's weight, load of the building and cost of the structure.also easy and fast to construct, and improve efficiency;
3. qualified combustion performance:
combustion performance reach the B2 level of building and
decoration material class, the same as polystyrene;
4. good corrosion resistance and ageing resistance: resistance to
acid and organic solvents,long-term exposure to the Sun, minor
aging, special anti-aging treatment but can be done;
5. superior production technology to meet different needs:
continuous and controllable production process meets different
requirements of the length and width, effectively reducing the
waste during transportation and installation.
