Active Member
|
[China]
Address: Building B, Zhiquan Hi-tech Park, Pengwu Village, Dongkeng Town, Dongguan City, Guangdong Province
Contact name:susan
Dongguan kuayue ElectronicCo.,Ltd |
|
|
Thermal interface silicone material is high-performance,thermal conductive gap filling materials, mainly for the transmission interface between the electronic equipment,and heat sink or product outer coving.
With nice stickiness,flexibility, good compression performance and excellent heat conductivity designed for it,it makes the products can discharge gas from the electronic original and heat sink, to achieve fully conforming and obviously cooling effect.
HC300 thermal gap filler product data
| Test Project | HC300 Test Results | Units | Tolerance | Test Method |
| Color | customize | / | / | Visual |
| Thickness | 0.3~5.0 | mm | ±10% | ASTM D374 |
| Proportion | 2.80 | g/cc | ±5% | ASTM D792 |
| Hardness | 30 | Shore C | ±5% | ASTM D2240 |
Tensile Strength
| 8.0 | kg/c㎡ | ±5% | ASTM D412 |
| 5.88*109 | pa | ASTM D412 | ||
| Temperature Range | -40~+220 | ºC | ±5% | EN 344 |
| Volume resistivity | 1.7*1013 | Ω.cm | ±5% | ASTM D247 |
| Withstand Voltage | >4.0 | kv/mm | ±5% | ASTM D149 |
| Flame Resistivity | V0 | / | UL-94 | |
| Thermal conductivity | 3.0 | w/m.k | ±5% | ASTM D5470 |
| ROHS Compliance | YES | / | / | ROHS |
1.Moderate tack on both sides ;
2.High conformability to uneven surfaces at low stress application;
3.Electrical isolating;
4.Very cost effective.
A: Yes, you can get some free samples, but the shipping cost of samples should be paid by you.
A:We have obtain UL, SGS, ROHS ISO and REACH certificattes, approved by third party with testing report. we can provide you with the testing report of thermal conductive matrials to ensure our product quality.
A: We have thermal conductive silicone pad with different thermal conductivity including HC100, HC150, HC200, HC250,HC300,HC400,HC500, HCP100. And we have thermal conductive adhesive tape: HCT with PET as base material and HCTM without PET as base material. We also have thermal conductive graphite sheet apply in different electronic industries. GSH is apply on smart phone, GSB is for laptop , and GSM is for LED.
A: Yes , all the thermal conductive materials except HCP series, thickness no more than 0.5mm can add fiberglass as carrier.
A: Our products are widely used in various industries, including poower supply, LED lights, laptop, LED TV, Set top box, communication, heat transfer, chip IC, automotive electronics and photoelectricity etc.
A: Our thermal conductive silicone pad use silicone rubber as based material. The service life of silicone pad depend on the service life of silicone rubber. The silicone rubber industry recognizes a 20-year life for silicone rubber when used within specified operation parameters.
A: The shelf life is a measurement of stable storage life in specified storage conditions. Shelf life for thermal conductive gap filler pad is one year after date of manufacture. For thermal conductive gap pad with adhesive, the shelf life is six months after the date of manufacture. After these dates, inherent tack and adhesive properties should be re-characterized.
A: Yes, all our thermal conductive materials are isolating with the voltage endurance over thousands of volt.
Test items | HC 150 test value | Unit | Test method |
Color | Customized | Visual | |
Thickness | 0.3-10 | mm | ASTM D374 |
Density | 2.1±0.1 | g/cc | ASTM D792 |
Hardness | 30±5 | Shore C | ASTM D2240 |
Tebsuke Strength | 8 | kg/cm2 | ASTM D412 |
5.88*109 | Pa | ASTM D412 | |
Continous Use Temp | -40~+220 | ℃ | EB344 |
Volume Resistivity | 1.7*1013 | Ωcm | ASTM D247 |
Wthstand Voltage | >4.0 | kv/mm | ASTM D149 |
Flame Rating | V0 | UL-94 | |
Thermal conductivity | 1.5 | w/m.k | ASTM 5470 |
