|
[China]
Trade Verify
Address: Building B8, Industry District Ⅱ, Xicheng, Hengli Township, Dongguan City
Contact name:Dana
Dongguan Ziitek Electronic Materials & Technology Ltd. |
|
Verified Suppliers
|
|
|
2.5mmT Moldability for Complex Parts Gray Conductive Pads for CPU
The TIF7100M is not only designed to take advantage of the gap heat transfer, to fill gaps, complete the heat transfer between heating and cooling parts, but also played insulation, damping, sealing and so on, to meet the equipment miniaturization and ultra-thin design Requirements, which is a highly technology and use, and the thickness of the wide range of applications, is also an excellent thermal conductivity filler material.
Features
> Good thermal conductive: 6.0 W/mK
> Thickness: 2.5mmT
> hardness:50 shore 00
> Colour: Grey
> Moldability for complex parts
> Soft and compressible for low stress applications
> Naturally tacky needing no further adhesive coating
Applications
>Automotive engine control units
>Telecommunication hardware
>Handheld portable electronics
>Semiconductor automated test equipment (ATE)
>CPU
>display card
Typical Properties of TIF7100M Series | ||||
Color | Grey | Visual | Composite Thickness | Thermal Impedance@10psi (℃-in²/W) |
Construction & Compostion | Ceramic filled silicone elastomer | *** | 10mils / 0.254 mm | 0.16 |
20mils / 0.508 mm | 0.20 | |||
Specific gravity | 3.25 g/cc | ASTM D297 | 30mils / 0.762 mm | 0.31 |
40mils / 1.016 mm | 0.36 | |||
| Thickness | 2.5mmT | *** | 50mils / 1.270 mm | 0.42 |
60mils / 1.524 mm | 0.48 | |||
Hardness | 50 Shore 00 | ASTM 2240 | 70mils / 1.778 mm | 0.53 |
80mils / 2.032 mm | 0.63 | |||
| Thermal conductivity | 6.0W/mk | ISO22007-2.2 | 90mils / 2.286 mm | 0.73 |
100mils / 2.540 mm | 0.81 | |||
Continuos Use Temp | -40 to 160℃ | *** | 110mils / 2.794 mm | 0.86 |
120mils / 3.048 mm | 0.93 | |||
Dielectric Breakdown Voltage | >5500 VAC | ASTM D149 | 130mils / 3.302mm | 1.00 |
140mils /3.556 mm | 1.08 | |||
Dielectric Constant | 4.2 MHz | ASTM D150 | 150mils / 3.810 mm | 1.13 |
160mils / 4.064 mm | 1.20 | |||
Volume Resistivity | 5.2X1013 Ohm-cm | ASTM D257 | 170mils / 4.318 mm | 1.24 |
180mils / 4.572 mm | 1.32 | |||
Fire rating | 94 V0 | equivalent UL | 190mils / 4.826 mm | 1.41 |
200mils / 5.080 mm | 1.52 | |||
Thermal conductivity |
6.0 W/m-K | ASTM D5470 | Visua l/ ASTM D751 | ASTM D5470 |
Company Profile
Ziitek company is a manufacturer of thermal conductive gap fillers, low melting point thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products, with well-equipped testing equipment and strong technical force.
Standard Sheets Sizes:
8" x 16"(203mm x 406mm)
TIF™ series Individual die cut shapes can be supplied.
FAQ:
Q: How do I place an order?
A:1. Click the "Sent messages" button to continue with the process.
2. Fill out the message form by entering a subject line, and message to us.
This message should include any questions you might have about the products as well as your purchase requests.
3. Click the "Send" button when you are finished to complete the process and send your message to us
4. We will reply you as soon as possible with Email or online
