Led Lamps Black Thermal Conductive Plastic Housing 5 W / mK with
1.45g / cm Specific Gravity
TCP™200-50-01A is a Thermally Conductive Engineering Plastic developed for the
housing design which requires high thermally conductivity and
reduces the weight more than 30% comparing with the same aluminium
devices.
Application
To potting LED Lighting heat spreader and power- driver. |
Relay sealant |
tip type LED |
PCB and plastics |
small electrical devices |
IGBTS |
Transformer |
LED Power Supply |
LED Controller |
LED Lights |
LED Ceilinglamp |
Monitoring the Power Box |
AD-DC Power Adapters |
Rainproof LED Power Supply |
Waterproof LED Power Supply |
Piranha wroof and common lED module |
LED module for Channelletters |
SMD LED module |
LED Flesible strip, LED bar |
Features
> Good thermal conductivity: 5.0W/mK
> Excellent thermal conductivity compared to normal engineering plastics
> Lighter than normal Aluminum housing 30% in weight
> Excellent mould ability in injection moulding
> Much higher production yield than normal Aluminum Die Casting
> Excellent flexibility in designing final products such as housings.
> UL94 V-0.
Typical Properties of TCPTM 200-50-01A |
Items | Test method | Unit | Typical data |
Physical Properties |
Color | Visual | ***** | Black |
Melt index | ISO 1133 | g/10min | 4 |
Specific Gravity | ISO 1183 | g/cm3 | 1.45 |
Shrinkage | ISO 294 | % | 0.1 |
Mechanical Properties |
Tensile Strength | ISO 527 | MPa | 55 |
Flexural Strength | ISO 178 | MPa | 80 |
Flexural Modulus | ISO 178 | MPa | 15800 |
Impact Strength, notched | ISO 180 | kJ/m2 | 2.5~3.5 |
Electrical Properties |
| | | |
Dielectric Constant, 1MHz | ASTM D150 | ***** | 4.5 |
Volume Resistivity | ASTM D257 | Ohm-meter | 10000 |
Thermal Properties |
Heat Deflection Temperature | ASTM D648 | ℃ | 150 |
Thermal Conductivity In Plane | ASTM E1461 | W/m-K | 15 |
Thermal Conductivity Throngh Plane | ASTM E1461 | W/m-K | 5.0 |
Flame retardancy | Min. thick. 1.0mm | Class | V-0 |
a. Pre-Drying : 4 hrs. @ 80℃ by Hopper Dryer
b. Recommendable Process Temperature at molding machine
- Nozzie : 280℃
- Front : 270℃
- Middle : 260℃
- Rear : 250℃
c. Cycle time : 30sec
,,