White 130℃ PP Heat Sinking Thermal Conductive Plastic TCP 100-01PP
, 1 W-mK , RoHs and UL 1.55g/cm3, 94V0
TCP 100-01PP is a Thermally Conductive Engineering Plastic developed for the
housing design which requires high thermally conductivity and
reduces the weight more than 30% comparing with the same aluminium
devices.
Application
To potting LED Lighting heat spreader and power- driver. |
Ferrite cements |
Relay sealant |
Power transformers and coils |
tip type LED |
PCB and plastics |
small electrical devices |
IGBTs |
Transformer |
LED Power Supply |
LED Controller |
LED Lights |
LED Ceilinglamp |
Monitoring the Power Box |
AD-DC Power Adapters |
Rainproof LED Power Supply |
Waterproof LED Power Supply |
Piranha wroof and common lED module |
LED module for Channelletters |
SMD LED module |
LED Flesible strip, LED bar |
LED PanelLight |
LED floot light |
Features
> Good thermal conductivity:1 W/mK
> Excellent thermal conductivity compared to normal engineering plastics
> Lighter than normal Aluminum housing 30% in weight
> Excellent mould ability in injection moulding
> Much higher production yield than normal Aluminum Die Casting
> Excellent flexibility in designing final products such as housings.
> UL94 V-0 .
Typical Properties of TCP 100-01PP |
Items | Test method | Unit | Typical data |
Physical Properties |
Color | Visual | ***** | white |
Melt index | ISO 1133 | g/10min | 14.73 |
Specific Gravity | ISO 1183 | g/cm3 | 1.55 |
Shrinkage | ISO 294 | % | 1.3 |
Mechanical Properties |
Tensile Strength | ISO 527 | MPa | 9,92 |
Flexural Strength | ISO 178 | MPa | 38 |
Flexural Modulus | ISO 178 | MPa | 3900 |
Impact Strength, notched | ISO 180 | kJ/m2 | 8.9 |
Electrical Properties |
Dielectric Breakdown Voltage | ASTM D149 | VAC | >10000 |
Dielectric Constant, 1MHz | ASTM D150 | ***** | 4.5 |
Volume Resistivity | ASTM D257 | Ohm-meter | 7.0 X 109 |
Thermal Properties |
Heat Deflection Temperature | ASTM D648 | ℃ | 130 |
Thermal Conductivity Throngh Plane | ASTM E1461 | W/m-K | 1 |
Flame retardancy | Min. thick. 1.0mm | Class | V-0 |
a. Pre-Drying : 4 hrs. @ 80℃ by Hopper Dryer
b. Recommendable Process Temperature at molding machine
- Nozzie : 280℃
- Front : 270℃
- Middle : 260℃
- Rear : 250℃
c. Cycle time : 30sec