|
[China]
Trade Verify
Address: Building B8, Industry District Ⅱ, Xicheng, Hengli Township, Dongguan City
Contact name:Dana
Dongguan Ziitek Electronic Materials & Technology Ltd. |
|
Verified Suppliers
|
|
|
Keeping economy high efficiency soft 27shore00 3W Ceramic filled silicone thermal conductive pad 2.50 g/cc for laptop
With a wide range, good quality, reasonable prices and stylish designs, Ziitek thermal conductive interface materials are extensively used in Mainboards, VGA cards, Notebooks, DDR&DDR2 products, CD-ROM ,LCD TV, PDP products, Server Power products, Down lamps, Spotlights, Street lamps, Daylight lamps, LED Server Power products and others. Ziitek provide thermal conductive gap fillers, low melting point thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products and so on, for various applications.
The TIF™100-30-23U is an electrically isolating material, which allows its use in applications requiring isolation between heat sinks and high-voltage, bare-leaded devices. Thermally conductive interface materials are applied to fill the air gaps between the heating elements and the heat dissipation fins or the metal base. Their flexibility and elasticity make them suited to the coating of the very uneven surfaces. Heat can transmit to the metal housing or dissipation plate from the separate elements or even the entire PCB, which in effect enhances the efficiency and life-time of the heat-generating electronic components.
Features:
> Outstanding thermal performance
> Good thermal conductive: 3 W/mK
> Naturally tacky needing no further adhesive
coating
> Soft and Compressible for low stress applications
> Available in varies thickness
Applications:
> notebook
> IGBTs
> Laptop
> Heat Sinking Housing at LED-lit BLU in LCD
> LED TV and LED-lit lamps
> RDRAM memory modules
> Micro heat pipe thermal solutions
> Automotive engine control units
> Telecommunication hardware
> Handheld portable electronics
Typical Properties of TIF™100-30-23U Series | ||||
Color | The light blue | Visual | Composite Thickness | hermalImpedance @10psi (℃-in²/W) |
Construction & Compostion | Ceramic filled silicone rubber | *** | 10mils / 0.254 mm | 0.57 |
| 20mils / 0.508 mm | 0.71 | |||
Specific Gravity | 2.50 g/cc | ASTM D297 | 30mils / 0.762 mm | 0.88 |
40mils / 1.016 mm | 0.96 | |||
Heat Capacity | 1 l/g-K | ASTM C351 | 50mils / 1.270 mm | 1.11 |
60mils / 1.524 mm | 1.26 | |||
Hardness | 27 Shore 00 | ASTM 2240 | 70mils / 1.778 mm | 1.39 |
80mils / 2.032 mm | 1.54 | |||
Tensile Strength | 48 psi | ASTM D412 | 90mils / 2.286 mm | 1.66 |
100mils / 2.540 mm | 1.78 | |||
Continuos Use Temp | -50 to 200℃ | *** | 110mils / 2.794 mm | 1.87 |
120mils / 3.048 mm | 1.99 | |||
| Dielectric Breakdown Voltage | >10000 VAC | ASTM D149 | 130mils / 3.302mm | 2.12 |
140mils / 3.556 mm | 2.22 | |||
Dielectric Constant | 10.2 MHz | ASTM D150 | 150mils / 3.810 mm | 2.31 |
160mils / 4.064 mm | 2.41 | |||
| Volume Resistivity | 7.3X10" Ohm-meter | ASTM D257 | 170mils / 4.318 mm | 2.51 |
180mils / 4.572 mm | 2.58 | |||
Fire rating | 94 V0 | equivalent UL | 190mils / 4.826 mm | 2.64 |
200mils / 5.080 mm | 2.72 | |||
Thermal conductivity | 3 W/m-K | ASTM D5470 | Visua l/ ASTM D751 | ASTM D5470 |
Quality:
Do it Right the First Time, Total Quality Control.
Effectiveness:
Work Precisely and Thoroughly for Effectiveness.
Service:
Quick Response, On Time Delivery and Excellent Service.
TeamWord:
Teamwork that Integrates Sales, Marketing, Engineering, R&D,
Manufacturing, Logistics, all other Supporting and Services to
Satisfy Customer Needs.
Ziitek Culture
Quality :
Do it right the first time, total quality control
Effectiveness:
Work precisely and thoroughly for effectiveness
Service:
Quick response, On time delivery and Excellent service
Team work:
Complete teamwork, including sales team, Marketing team, engineering team, R&D team, Manufacturing team, logistics team. All is for supporting and servicing a satisfy service for customers.
Packaging Details & Lead time
The packaging of thermal pad
1.with PET film or foam-for protection
2. use Paper Card To Separate Each Layer
3. export carton inside and outside
4. meet with customers' requirement-customized
Lead Time :Quantity(Pieces):5000
Est. Time(days): To be negotiated
