Active Member
|
[China]
Address: 18F, Building 2, Nantai Yunchuanggu, Phoenix Community, Guangming District, Shenzhen, Guangdong, China
Contact name:Amy
Shenzhen FRIDA LCD Co., Ltd |
|
|
10.1 Inch HDMI LCD Capacitive Touch Screen 1280×800 IPS With Raspberry Pi
General Description:
10.1inch Capacitive Touch Screen LCD 1280×800 HDMI,IPS,Fully Laminated Screen, Supports Raspberry Pi, Jetson Nano, and PC
Supports Raspbian, 5-points touch, driver free Supports Ubuntu /
Kali / WIN10 IoT, single point touch, driver free Supports
Retropie, driver free
Supports all versions of Raspberry Pi
Jetson Nano
Supports Ubuntu, single point touch, driver free
PC, Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free
Specifications:
| Item | Contents | Unit |
| LCD Display Size | 10. 1” | inch |
| Module Structure | LCD Display + CTP Touch + PCBA | --- |
| LCD Display Type | TFT/TRANSMISSIVE | --- |
| LCD Display Mode | Normally Black | --- |
| Viewing direction | ALL VIEW | O' Clock |
| PCBA Outside Dimensions | TBD | mm |
| LCM Outside Dimensions | TBD | mm |
| Active area (WxH) | 216.96(W)*135.60(H) | mm |
| Number of Dots | 1280x800 | --- |
| Driver IC | TBD | --- |
| Colors | 16.7M | --- |
| Backlight Type | 6*6LEDS / White | --- |
Module Interface Type | HDMI Interface (TFT) | --- |
| USB Interface (CTP) | --- | |
System Support | Raspberrv Pi /Win7 /Win8 /Win10 | --- |
| Android/Linux (need to be configured first) | --- | |
| Input Voltage(VDD) | DC-5.0V | V |
Ctp Characteristics:
| Item | Contents | Unit |
| Panel Type | Lens Cover + Glass Sensor | --- |
| Resolution | 1280 X 800 | Pixel |
| Surface Hardness | 3H | --- |
| Transparency | ≥86% | mm |
| Driver IC | TBD | --- |
| Interface Type | USB Interface | --- |
| Support Points | 5 | --- |
| Sampling Rate | 20~100 | Hz |
| Supply voltage | 3.3V | V |
Working With Raspberry Pi 4
Working With Raspberry Pi-3B+
Working With Raspberry Pi Zero W
Working With Mini PC
Works with Raspberry Pi:
Step 1, Install Raspbian official image
1.Download the latest image from the official download.
2.Install the system according to the official tutorial steps.
Step 2, modify the “config.txt”
After the programming of Step1 is completed, open the config.txt
file of TF card root directory and add the following code at the
end of the file, save and eject Micro SD Card safely:
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=1
hdmi_cvt 800 480 60 6 0 0 0
Step 3, Drive the 5inch HDMI Display-B with the Raspberry Pi
Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and
LCD by HDMI cable; connect USB cable to one of the four USB ports
of Raspberry Pi, and connect the other end of the USB cable to the
USB port of the LCD; then supply power to Raspberry Pi; after that
if the display and touch both are OK, it means drive successfully
(please use the full 2A for power supply).
Works with PC:
1) Turn on the backlight switch on the back of the LCD.
2) Connect the LCD's TOUCH port to the PC's USB port. Wait for a
moment, Windows will automatically recognize the touch function.
3) Connect the HDMI port of the LCD to the HDMI port of the PC and
wait for about 10 seconds to see the normal display of the LCD.
