Home Companies Shenzhen FRIDA LCD Co., Ltd

Full Viewing Angle 20 Pin 15 Inch LCD Display 1024x768 Lvds

Active Member

Contact Us

[China]

Address: 18F, Building 2, Nantai Yunchuanggu, Phoenix Community, Guangming District, Shenzhen, Guangdong, China

Contact name:Amy

Shenzhen FRIDA LCD Co., Ltd

Full Viewing Angle 20 Pin 15 Inch LCD Display 1024x768 Lvds

Country/Region	china
City & Province	shenzhen guangdong

Product Details

15 Inch Tft Display 1024x768 Full Viewing Angle Lvds Interface 20 Pins

General Description:

DV150X0M-N10 manufacturer is BOE, type is a-Si TFT-LCD , LCD module, resolution 1024(H) × 768(V), pixel arrangement RGB vertical bar, display area 304.128(H) × 228.096(V) mm, external dimensions 326.5(H) × 253.5(V) × 9.7(D) mm.

Features:

LVDS interface with 1 pixel / clock
High-speed response
Low color shift image quality
6-bit +FRC color depth, display 16.7M colors
Wide viewing angle
DE (Data Enable) only mode
ADS technology is applied for high display quality
RoHS compliant

Specifications:

Parameter	Specification	Unit	Remarks
Active area	304. 128(H) × 228.096(V)	mm
Number of pixels	1024(H) × 768(V)	pixels
Pixel pitch	0.297(H) × 0.297(V)	mm
Pixel arrangement	Pixels RGB Vertical stripe
Display colors	16.7M	colors	6bits+FRC
Display mode	Normally Black
Dimensional outline	326.5(H) × 253.5(V) × 9.7(Total)	mm	Detail refer to drawing
Weight	930	g
Power Consumption	8.72	Watt	Typ.
Bezel width (L/R/U/D)	10/10/11.7/11.7	mm
Surface Treatment	Haze 25%, 3H
Back-light	E-LED Light bar Type
LED life	50000
Display Direction	landscape & Portrait

Absolute Maximum Ratings:

The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. The operational and non-operational maximum voltage and current values are listed in Table.

Parameter	Symbol	Min.	Max.	Unit	Remark
Power Supply Voltage	VDD	-0.3	4	V	Ta = 25℃
Operating Temperature	TOP	-20	+70	℃	Note 1
Storage Temperature	TSUR	-20	+70	℃
Storage Temperature	TST	-20	+70	℃
Operating Ambient Humidity	Hop	10	90	%RH
Storage Humidity	Hst	10	90	%RH

Note 1 : Wet bulb temperature should be 39℃ max. and no condensation of water.

Electrical Specifications:

Parameter		Symbol	Values			Unit	Remark
Parameter		Symbol	Min	Typ	Max	Unit	Remark
Power Supply Input Voltage		VDD	3.0	3.3	3.6	V	Note 1
Power Supply Current		IDD	-	410	740	mA	Note 1
Power Supply Ripple Voltage		VRP	-	-	300	mV
Rush Current		IRUSH	-	2	3	A	Note 2
LVDS Interface	Differential Input High Threshold Voltage	VLVTH	-	-	+100	mV	VLVC=1.2V
	Differential Input Low Threshold Voltage	VLVTL	- 100	-	-	mV	VLVC=1.2V
	Common Input Voltage	VLVC	0.7	-	1.6	V
CMOS Interface	Input High Threshold Voltage	VIH	0.7VDD	-	VDD	V
CMOS Interface	Input Low Threshold Voltage	VIL	0	-	0.3VDD	V
Power Consumption		PD		0.8	1.3	W
		PBL		7.92	8.71		Note 3
		Ptotal		8.72	10.1

Note 1 : The supply voltage is measured and specified at the interface connector of LCM.The current draw and power consumption specified is for VDD=3.3V,Test Pattern of power supply current.

Note 2 : The duration of rush current is about 2ms and rising time of Power Input is 1ms(min).

Note 3 :Calculated value for reference (Input pins*VPIN × IPIN) excluding inverter loss.

Backlight Electrical Specifications:

Parameter			Min.	Typ.	Max.	Unit	Remarks
LED Driver Power Supply Voltage		HVDD	10.8	12	12.6	V
LED Driver Power Supply Current		IHVDD	550	600	700	mA
EN Control Level	Backlight on	VENH	3	3.3	3.6	V	EN logic high voltage
EN Control Level	Backlight off	VENL	0	0	0.6	V	EN logic low voltage
PWM Control Level	PWM High Level	VPML	3	3.3	3.6	V
PWM Control Level	PWM Low Level	VPML	0	0	0.6	V
PWM Control Frequency		F PWM	0.12	-	20	KHz	Refer to customer comments
Duty Ratio		-	5	-	100	%
LED Life-Time		N/A	50,000	-	-	Hour
LED Light Bar Input Voltage Per Input Pin		VPIN	32.4	36	39.6	V
LED Light Bar Input Current Per Input Pin		IPIN	-	55	-	mA
LED Power Consumption		PBL	-	7.92	8.71	W

Interface Connection:

Pin No	Symbol	Description	Pin No	Symbol	Description
1	VDD	Power Supply, 3.3V(typ.)	11	RIN2-	-LVDS differential data input 2
2	VDD	Power Supply,3.3V(typ.)	12	RIN2+	+LVDS differential data input 2
3	VSS	Ground	13	VSS	Ground
4	NC	No Connection	14	CLKIN-	-LVDS differential clock input CLK
5	RIN0-	-LVDS differential data input 0	15	CLKIN+	+LVDS differential clock input CLK
6	RIN0+	+LVDS differential data input 0	16	VSS	Ground
7	VSS	Ground	17	RIN3-	-LVDS differential data input 3
8	RIN1-	-LVDS differential data input 1	18	RIN3+	+LVDS differential data input 3
9	RIN1+	+LVDS differential data input 1	19	VSS	Ground
10	VSS	Ground	20	NC	No Connection

Optical Specification:

Parameter			Symbol	Condition	Min	Typ	Max	Unit	Remark
Viewing Angle	Horizontal		Θ3	CR > 10	85	89		Deg.	Note 1
	Horizontal		Θ9		85	89		Deg.
	Vertical		Θ12		85	89		Deg.
	Vertical		Θ6		85	89		Deg.
Brightness			Lv	Θ = 0. ILED=55m A	315	350		nit
Uniformity		9 Points	ΔY9	Θ = 0. ILED=55m A	75%	80%
Contrast ratio			CR	Θ = 0.	700:1	1000:1	-
Reproduction of color		White	Wx	Θ = 0. (Center) Normal Viewing Angle	TYP. - 0.03	0.313	TYP. + 0.03
		White	Wy			0.329
		Red	Rx			0.649
		Red	Ry			0.338
		Green	Gx			0.323
		Green	Gy			0.627
		Blue	Bx			0.155
		Blue	By			0.056
Color Gamut					67	72	-	%
Response Time		Tr+Tf			-	30	35	ms
Gamma Scale					2.0	2.2	2.4

Note :

1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are determined for the horizontal or 3, 9 o‟clock direction and the vertical or 6, 12 o‟clock direction with respect to the optical axis which is normal to the LCD surface.

Operating Precautions:

1.Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.

2.Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through wrist band etc.