Active Member
|
[China]
Contact name:Agatha
RONBO ELECTRONICS LIMITED |
|
|
Customized RGB Interface High Luminance 5.0 Inch 480*854 Smart Phone LCD Display
Product Specification:
It is a thin thickness and narrow width 5 inch Cell Phone LCD Display with 480*854 pixels.
It supports MIPI interface including typical brightness 400 cd/m2.
This Cell Phone LCD Display can be operating at temperatures from –20℃ to +70℃.
It's storage temperatures range from -30℃ to +80℃.
| Model NO.: | RB050D50N329A |
| Screen Size: | 5.0" |
| Display type | TN |
| Resolution: | 480x854 |
| Viewing direction: | 12:00 Clock |
| Module size(W*H*T): | 65.26(W)X119.3(H)X1.67(T) |
| Active area (W*H): | 61.56(W) ×109.53 (H) |
| Brightness: | 400cd/m² |
| Backlight: | 2S6P=12 WLED If=400mA, Vf=19.2V |
| Contrast | 800 |
| Interface: | RGB |
| Pin NO: | 50Pins |
| Pin pitch | 0.5mm |
| Connecting type | FPC Connector |
| Operating Temperature: | -20 ~ +70ºC |
| Storage Temperature | -30 ~ +80ºC |
Absolute Maximum Ratings
| ITEM | Symbol | MIN | MAX | UNITS |
| Power supply voltage 1 | VCC | 2.5 | 3.3 | V |
| Power supply voltage 1 | IOVCC | 1.65 | 3.3 | V |
| Operating temperature | Topr | -20 | +70 | ℃ |
| Storage temperature | Tstg | -30 | +80 | ℃ |
| Humidity | RH | --- | 90%(Max40°C) | RH |
Interface Description
| PIN NO. | PIN NAME | DESCRIPTION |
| 1 | LED_A | Power Supply For LED Backlight Anode Input |
| 2 | LED_A | Power Supply For LED Backlight Anode Input |
| 3 | LED_K | Power Supply For LED Backlight Cathode Input |
| 4 | LED_K | Power Supply For LED Backlight Cathode Input |
| 5 | GND | System Ground |
| 6 | NC | Not Control |
| 7 | DVDD | POWER SUPPLY FOR LCD 1.8V |
| 8 | MODE | Not Control |
| 9 | DE | Data input enable |
| 10 | VSYNC | Frame synchronizing signal for RGB interface operation |
| 11 | HSYNC | Line synchronizing signal for RGB interface operation |
| 12~19 | B7~B0 | Blue Data |
| 20~27 | G7~G0 | Green Data |
| 28~35 | R7~R0 | Green Data |
| 36 | GND | System Ground |
| 37 | DCLK | Dot clock signal for RGB interface operation |
| 38 | GND | System Ground |
| 39 | NC | Not Control |
| 40 | NC | Not Control |
| 41 | NC | Not Control |
| 42 | NC | Not Control |
| 43 | AVDD | POWER SUPPLY FOR LCD 2.8V |
| 44 | RESET | Reset Signal |
| 45 | SPI_CS | CHIP SELECT PIN |
| 46 | NC | Not Control |
| 47 | SCL | The pin used as serial clock pin |
| 48 | GND | System Ground |
| 49 | SPI_IN | Serial data input |
| 50 | SPI_output | Serial data output |
Relatived Products:
If you need other Cell Phone LCD Display, please click Model No. below to review the details:
| Size | Model No. | Resolution | Module size (W*H*Tmm) | Active Area (W*Hmm) | Controller | Brightness & Backlight | Display Type | Interface | TP | Remarks &DATA SHEET |
| 5.0" | RB050D50N329A | 480*854 | 65.26*119.3*1.67 | 61.56*109.53 | JD9161 | 400cd/m², 6S2P=12 WLED | TN | RGB 24Bit, FPC 50Pin,Pitch:0.5mm | -- | |
| 5.0" | RB050M20N373A | 480*854 | 65.26*119.3*2.05 | 62.06*110.42 | GC9503V | 400cd/m², 6S2P=12 WLED | TN | MIPI 3 Lane, FPC 20Pin,Pitch:0.8mm | -- | |
| 5.0" | RB050M21N353A | 480*854 | 64.7*118.7*1.67 | 61.56*109.53 | ST7701S | 400cd/m², 6S2P=12 WLED | TN | MIPI 3 Lane, FPC 21Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050M24N07A | 480*854 | 66.56*121.0*2.2 | 62.06*110.42 | ST7701S | 400cd/m², 6S2P=12 WLED | TN | MIPI 3 Lane, Connector type, 24 Pin | -- | |
| 5.0" | RB050M39N366A | 480*854 | 66.2*120.0*2.1 | 62.06*110.42 | ST7701S | 400cd/m², 6S2P=12 WLED | TN | MIPI 2 Lane, FPC 39Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050M39N377A | 480*854 | 65.26*119.3*1.65 | 62.06*110.42 | ST7701S | 400cd/m², 6S2P=12 WLED | TN | MIPI 2 Lane, FPC 39Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050M39N385A | 480*854 | 66.4*120.05*2.15 | 62.06*110.42 | ST7701S | 400cd/m², 6S2P=12 WLED | TN | MIPI 4 Lane, FPC 39Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050D40N10A | 480*854 | 66.2*120*2.0 | 62.06*110.42 | ILI9806E | 400cd/m², 6S2P=12 WLED | IPS | RGB 24Bit, FPC 40PIN,Pitch:0.5mm | -- | |
| 5.0" | RB050D40N267A | 480*854 | 66.4*120.05*1.75 | 61.56*109.53 | ST7701S | 400cd/m², 6S2P=12 WLED | IPS | RGB 24Bit, FPC 40PIN,Pitch:0.5mm | -- | |
| 5.0" | RB050D45T448A | 480*854 | 66.4*120.05*3.55 | 61.56*109.53 | ST7701S | 350cd/m², 6S2P=12 WLED | IPS | RGB 24Bit, FPC 45PIN,Pitch:0.5mm | RTP | |
| 5.0" | RB050D40N09A | 480*854 | 66.4*120.05*1.75 | 61.63*109.65 | ILI9806E | 400cd/m², 6S2P=12 WLED | IPS | MIPI 2 Lane, FPC 20Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050M25N408A | 480*854 | 65.26*118.9*2.06 | 61.56*109.53 | GC9503V | 400cd/m², 6S2P=12 WLED | IPS | MIPI 3 Lane, FPC 25Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050M24N405A | 720*1280 | 65.26*119.3*1.65 | 62.1*110.4 | JD9365AA | 400cd/m², 6S2P=12 WLED | IPS | MIPI 4 Lane, Connector type, 24 Pin | -- | |
| 5.0" | RB050M25N226A | 720*1280 | 65.36*118.8*1.63 | 62.1*110.4 | JD9365AA | 400cd/m², 6S2P=12 WLED | IPS | MIPI 4 Lane, FPC 25Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050M30N334A | 720*1280 | 65.26*118.9*1.65 | 62.1*110.4 | JD9365AA | 400cd/m², 6S2P=12 WLED | IPS | MIPI 4 Lane, Connector type, 30 Pin | -- | |
| 5.0" | RB050M39N08A | 720*1280 | 65.26*119.3*1.65 | 62.1*110.4 | JD9365AA | 400cd/m², 6S2P=12 WLED | IPS | MIPI 3 Lane, FPC 39Pin,Pitch:0.3mm | -- | |
| 5.0" | RB050M39N219A | 720*1280 | 65.26*119.3*1.65 | 62.1*110.4 | JD9365AA | 400cd/m², 6S2P=12 WLED | IPS | MIPI 3 Lane, FPC 39Pin,Pitch:0.3mm | -- | |
| 5.2" | RB052M25N06A | 1080*1920 | 67.3*123.85*1.36 | 64.8*115.2 | VM5296 | 400cd/m², 7S2P=14 WLED | IPS | MIPI 3 Lane, FPC 25Pin,Pitch:0.3mm | -- | |
| 5.5“ | RB055M31N34A | 720*1280 | 71.0*129.66*1.63 | 68.04*120.96 | ST7703 | 400cd/m², 7S2P=14 WLED | IPS | MIPI 4 Lane, FPC 31Pin,Pitch:0.3mm | -- | |
| 5.5“ | RB055M33N20A | 720*1280 | 71.0*129.66*1.63 | 68.04*120.96 | JD9365AA | 400cd/m², 7S2P=14 WLED | IPS | MIPI 4 Lane, FPC 33Pin,Pitch:0.3mm | -- | |
| 5.5“ | RB055M25N79A | 1080*1920 | 71.04*129.56*1.53 | 68.04*120.96 | ILI9885U | 400cd/m², 7S2P=14 WLED | IPS | MIPI 2 Lane, FPC 25Pin,Pitch:0.3mm | -- | |
| 5.5“ | RB055M39N82A | 1080*1920 | 71.04*129.56*1.53 | 68.04*120.96 | ILI9885U | 400cd/m², 7S2P=14 WLED | IPS | MIPI 2 Lane, FPC 39Pin,Pitch:0.3mm | -- |
Remarks: these are partial products listed, please contact us if you need other request.
Also we can offer custom solution if standard products couldn't meet buyer' requirements.
Other Popular Products:
1. Our standard TFT LCD Display size, and experienced team for Your Custom Solution:
1.44", 1.54”, 1.77", 2", 2.2“, 2.4",2.7”, 2.8'',3.0”, 3.2", 3.5", 4", 4.3", 4.5”, 5", 5.5", 5.6", 5.7", 7", 8", 9",10.1",10.4"
2. Our standard IPS LCD Display size, and experienced team for Your Custom Solution:
1.54”, 2.4", 2.8'',3.0”, 3.5", 4", 4.3", 4.5”, 5", 5.5", 7", 8", 9",10.1",10.4"
3. Standard touch screen LCD display for all kinds of TFT and IPS LCD display with Resistive and Capacitive touch panel, and can make customized touch screen optical bonding with LCD display
4. High Brightness TFT Display with from 800 cd/m² to1000cd/m² with good performance under sunlight readable (outdoor LCD display).
5. All common TFT Display will O film can be super wide view angle, close to IPS panel & same as MVA glass.
6. Standard and TFT and IPS LCD displays option Resistive and
Capacitive Touch Panel are applied for Cell phone, Tablet PC,
digital and industrial products and so on.
7. Customized and Standard mono Character LCD Module, COB and COG graphic LCD Module with various colors including yellow/green, white, blue, and with various backlight and LCD type combinations.
Product Application:
| Telecommunication Devices | Telephone, interphone, watch, tablet PC, radio |
| Consumer Products | Camera, DVD player, toy, Cell Phone, game player |
| Technical Equipment | Elevator controller, Industrial machine |
| Office Automation | Printer, scanner, attendance machine, fax machine |
| Home Appliances | Air-condition display, refrigerator, video doorbell |
| Automobile | GPS, video player, speedometer, audio broadcast |
| IT Products | Camera, handheld digital video, media play, tablet PC |
| Medical Equipment | Ultrasound machine, therapeutic equipment Blood pressure meter |
Packaging & Shipping & Delivery
Packaging Details:
All the products are packed in right way to keep it safe.
For small sizes of products we use tray + carton,
For bigger sizes we use foam slot + carton.
we also design packages according to customers' requirements
Shipping Details:
For small quantity orders: we ship by UPS Air-Express, or
DHL/FEDEX/TNT/ EMS Express service, it is safe and fast.
For large quantity orders: we ship by buyer's cargo agent in China,
we can also ship by air or sea transportation by our cargo agent.
Delivery Details:
Ready-made Sample: within 1 week
Custom Sample: 1~2 weeks
Mass production: 3-4 weeks
Our Advantage:
☆ Responsibility:
We take all responsibilities for any mistakes what we do make. We
will remake all wrong pieces and ship out shortly.
☆ Fast response:
Quickly realize your customized ideas, and have a sample ready in
short time
☆ Free Design:
We offer free design service depending on your ideas, logos,
colors, etc.
Good knowledge of the displays market to put together solutions
that add value and provide a unique proposition for the client
☆ Efficient Communication:
Our sales are all with high English language skills, they are
working so hard and efficient.
☆ High Quality:
All materials we purchase for making any orders are high quality
and RoHS compliant, and Control quality with ISO 9001:2008, ISO
14001:2004 management system.
Advance inspection instrument and equipment to ensure 100%
inspection for each and every piece before shipment
☆ Quick Delivery (Production Time):
Ready-made Sample: within 1 week
Custom Sample: 1~2 weeks
Mass production: 3-4 weeks
FAQ:
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008, ISO 14001:2004 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment
h 800*480 Capacitive Touch Screen LCD Display
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.
