Gester International Co., Ltd |
|
Automatic Pressure Air Forming Plastic PP PS PVC 3 Stations
Large Thermoforming Making Machine
Product Introduction
This Pressure Thermoforming Machine adopts the method of laminating
heating, adopts the technology of moving film punching, no
secondary pollution, high sanitary level, high production safety
coefficient, saving labor, the equipment set positive
pressure/negative pressure/positive and negative pressure automatic
molding, punching, cutting, manipulator grasp stack counting in a
production line to complete continuously, automatic conveying
products.
Feature
1. Mechanical, pneumatic and electrical combination, all working
actions are controlled by PLC. Touch screen makes the operation
convenient and easy.
2. Pressure And/Or Vacuum forming.
3. Upper and down mould forming.
4. Servo motor feeding, feeding length can be step-less adjusted.
High speed and accurate.
5. Upper & lower heater, four sections heating.
6. Heater with intellectual temperature control system,which has
high precision, uniform temperature, won’t be effected by outer
voltage.Low power consumption (energy saving 15%), ensure the
longer service life of heating furnace.
7. Forming and cutting unit mold open and close controlled by servo
motor, products automatically count.
8. Products be stacked downward.
9. Data memorization function.
10. Feeding width can be synchronously or independently adjusted in
electrical way.
11. Heater will automatically push-out when the sheet is over.
12. Auto roll sheet loading, reduce the working load.
Plastic Thermoforming Machine Key Specification
Forming Area | 850x780mm |
Max.Forming Depth | 150mm |
Sheet thickness | 0.2-1.5mm |
Work Efficiency | Max. 30 cycles/ Min |
Air Pressure | 0.9mpa |
Power Consumption | 50-70kw/h |
Max. Sheet Width | 760mm |
Suited Material | PP, PS, PET, PVC |
Total Max. Power | 110 |
Overall size(LxWxH)mm | 10040x2600x3200 |
Total Weight (T) | 7 |
Product Image