5 Test Methods Hydrostatic Head Tester Equipped with a Clearly LED Lamp

5 Test Methods Hydrostatic Head Tester Equipped with a Clearly LED Lamp

Application

Hydrostatic Head Tester, used for determining the resistance of fabrics (canvas, coated fabrics, cover cloth, rainproof clothing fabrics, and geotextile materials) and films to water penetration under pressure while firmly clamped in the test rig of standard area.

For special medical protective clothing compression-folding (Schildknecht) flex cracking resistance testing, this hydrostatic head tester is also capable of doing extra tests when it fails the flex cracking resistance test, which defined in standards like EN 14126 – 2003, EN14325, EN ISO 7854.

Specifications

• Pressure Range
  0 ~ 200kPa (20 m water column).
  0~ 500kPa (50 m water column).
  0 ~ 1000kPa (100 m water column).

• Closed-loop controlled servo motor drives pistons to achieve the unique water pressure raising rate balance system.

• The variable test method can be selected, test time and variable pressure increasing rate can be set and saved.

• Wide range of pressure increasing rate and freely adjustable. Pressure increasing system is adjusted by the dynamic feedback to prevent overload.

• Real-time test results are shown on the large colorful touch panel.

• Test results can be made up to a report on software and print out directly.

• 5 test methods are included

• Pressure raising mode, Constant-pressure mode, Constant pressure & fixed time mode, Extending-relaxing mode, Water penetration, and leakage mode.

• Equipped with a LED lamp to observe the test process clearly.

• Increasing rate of water pressure: 1 ~ 60kPa/min stepless adjustable

• Units: Pa, kPa, mmHg, cmH2O

• Automatic clamp with holding force: 5kN

• Standarad Test Head: 100cm2