3 PH thermal shock test chamber
Cold Thermal Shock Tester/Product Details
Hot and cold impact test is used to test the composite material
structure or degree in an instant by the extremely high
temperatures and under extremely low temperature environment can
endure continuous , in order to test its most chemical changes in
thermal expansion and contraction caused by a short or physical
injury. Applicable objects including metal, plastic , rubber, etc.
...... electronic materials can be used as a basis for improvement
of its products or reference .
Technical parameters:
Model:TS-42
Inner dimensions:40*35*30cm
High tank temperature range:RT-100 ℃
[sales(at)aslitesting.com]
Cryogenic tank humidity range:-40 ℃ ~ -10 ℃
Chamber shock temperature : temperature:RT-100 ℃;cold:-10 ℃ ~ -40 ℃
Warm-up time:RT-100 ℃ about 15 minutes
Cooling time:RT ~ -40 ℃ about 60 minutes
Impact time:0.1 to 999.9 hours , the cycle can be set from 1 to
9999 .
Thermal Testing Service/Features:
1.convenient pneumatic valve open , to ensure air tightness and
insulation protection ;
2.test tank completely still , by the applied load test hole wiring
;
3.storage mode prevents users from occupational injuries ; ( Note :
the exhaust gas generated by the liquid , causing the lungs to
reduce the amount of oxygen in the lungs , and produce burnout ,
lack of concentration , etc. )
4.The color LCD touch human-machine interface controller , simple
operation, easy to learn ;
5.Royal precision high temperature system,all using the PID
automatic calculation system Imperial ;
6.Selectable start position , high or low temperature start the
cycle ;
7.have reservations start function.
Programmable Thermal Shock Chamber /Standard configuration:
1.test holes : hole attached to the stainless steel body of the
left ψ50mm cover a hole a silicone plugs 1 .
2.Over-temperature protection: four LED digital micro computer
controller, to prevent the test due to temperature is too high or
too low to be destroyed , to ensure product safety
3.import SMC three modular door regulator
4.emergency stop switch a
5.pressure protection switch a
6.SUS # 304 stainless steel racks 2.
7.spare fuse set
8.controller manual set , a set of operating instructions , the
test report
