Thermostat Drying Chamber
Temperature chamber widely used in biochemistry , chemical and
pharmaceutical , electronics, appliances, connectors, resistors ,
etc., research applications , such as environmental protection ,
disinfection and sterilization of various types of training as well
as a dedicated automotive parts . Particularly suitable for drying
heat-sensitive , easily decomposed , easily oxidized substances and
articles of complex components for fast and efficient drying.
Dry Oven For Industry/Specifications:
1.Model:RHD-45
2.internal dimensions (W*H*D) cm:45*40*40
3.External Dimensions (W*H*D) cm:65*90*55
4.external material inside the box using SUS # 304 stainless
steel,1.0t matte treatment, the shell is made 1.2t steel paint.
[sales(at)aslitesting.com]
5.Temperature range RT-200 degree (300 degree);(400-500 degree
special type )
6.Accuracy about 1.5 degree percent.
7.Control microcomputer PID + SSR + Timer
8.shelving son and two layers
Vacuum Chamber/Box Configuration:
1.Box of high quality SUS304 # stainless steel plate , surface
coating , hard coating firm , with a strong anti-rust capability.
2.double glass door of the structure can be clearly observed items
inside the heating , and good insulation. The operator can
effectively avoid burns .
3.studio equipped with glass doors between the heat-resistant
rubber seals to ensure a high degree of vacuum inside the box .
4.outer surface of the heater installed in the studio the maximum
extent possible to improve the uniformity of the temperature inside
the box , and easy to clean interior.
5.studio quality stainless steel , smooth, smooth, easy to clean .
6.between the box and the studio , with good insulation function ,
effectively ensuring stable and accurate temperature inside the box
and the impact on the use of the environment.
7.microcomputer intelligent temperature control technology,
industrial PID. High precision temperature
control,anti-interference ability and the operation is very
convenient.
Electric Chamber Furnace/Instructions for use:
1.open the door , put on an object to be processed inside the shelf
, close the door . And close the discharge valve , open the vacuum
valve , turn
2.power,the power plug into a power outlet,the power switch on the
front panel is set to " ON" position,then the emergence of digital
display meter,which means that the device into operation .
3.by operating temperature controller, you need to set the inside
temperature .
4.instrument to work, the inside temperature gradually reaches the
set value , after the required drying time , the processing is
completed
5.Turn off the power , until the inside temperature close to
ambient temperature , hit the open valve to relieve the vacuum
chamber . Open the door , remove the object
