|
[China]
Trade Verify
Address: 150 Fenxi Road, Shangjia Urban Industrial Park, Building 2, Wanjiang District, Dongguan City, Guangdong Province
Contact name:Michael Chan
Perfect International Instruments Co., Ltd |
|
Verified Suppliers
|
|
|
Electronic Compress Test Machine Tensile Pressure Gauge 2KN Testing PET Bottle
Compress Test Machine Description :
Electronic Compress Test Machine Tensile Pressure Gauge 2KN Testing PET Bottle is designed for the instrument of the food processing industry packaging bottle and other containers of top pressure strength test, test of the bottle top pressure strength, top pressure deformation, holding pressure deformation. Equipped with the corresponding fixture can be measured with the bottle and packaging with edgewise compressive properties of tensile and tear test film.
Detail Parameters of Electronic Compress Test Machine :
| Gauge Name | Electronic Compress Test Machine Tensile Pressure Gauge 2KN Testing PET Bottle |
| Model | PT-5061A |
| Capacity selection | 100,200KG Optional one |
| Test items | The top pressure, the deformation of the top pressure, the deformation of the holding pressure, the tensile strength of the film, and the tearing strength of the film |
| Monitor | Power and extended display |
| Accuracy of measurement | Better than ±1.0% |
| Force resolution | 1/10,000 |
| Effective range of measurement | 1~100%F.S |
| Deformation display accuracy | Better than ±1.0% |
| Test speed range | 5～400mm/min,Can be arbitrarily set |
| Test maximum stroke | Maximum 650mm, no fixture |
| Effective test space | Distance 120mm,Left and right distance ∝ |
| Power unit switch | kgf,gf ,N,kN,Ibf |
| Stress unit switch | MPa,kKPa,kgf/cm2,Ibf/in2 |
| Deformation unit switch | mm,cm,in |
| Stop mode | Upper and lower limit safety setting, emergency stop button, program strength and elongation setting, test piece failure |
| Point method | The function of manual and pre - set points in the test procedure |
| Standard configuration | Top pressure fixture (120mm) 1, film tensile fixture 1, power supply line 1, CD operating instructions 1, 1 copies of the certificate, 1 copies of warranty card |
| Machine size | About 57×47×120cm(W×D×H) |
| Machine weight | About 35kg |
| Power | Stepping motor |
| Power Supply | 1PH,AC220V,50/60Hz,10A Or specify |
Compress Test Machine Advantages :
This Tensile Pressure Gauge completely change the traditional material testing machine machine bulky, complicated operation, performance of a single defect structure with the senior paint treatment of aluminum extrusion seal board built-in high precision, low resistance, gapless roll line screw and a guide post; measure and control system data recovery set and high operation speed, test results can be by the liquid crystal display or by needle type printer or printer to print output, to pull or pressure holding test. Product performance is stable and reliable, high measurement accuracy, easy to operate and easy to operate.
