Active Member
|
[China]
Address: No. 2-5B Factory Building, Aibide Processing Zone Caotan 5 Road, Economic and Technological Development Zone, Xi'an City, Shaanxi Province, China
Contact name:Jenny
Xi'an Automation Instrument No.1 Factory |
|
|
Explosion-proof electric contact pressure gauge
◎Application Description
This explosion-proof electric contact pressure gauge is designed according to GB38361.B83 and GB3836.2.B3, Meanwhile, it is manufactured according to the chart and technique document approved by the identified checking organization.
The meters can apply to measure pressure of non-crystal and non-condensing explosive mixture or non-explosive medium.
The meters could automatic control and signal alarm if they work with the electric apparatus parts with explosion-proof or other safety (for example, relay, contactor ,etc.).
◎Main Technology Data
| Type&code | Explosion-proof type (YX-160-B) |
| Measuring Range | -0.1-0~-0.1-2.4MPa, -0.1~0~60MPa (As customers requirements) |
| Pressure Unit | Mpa psi bar kg/cm2 ect |
| Accuracy Class | cl.1.5 cl.2.5 |
| Thread | M20*1.5 (We can accept all kinds of thread from customers) |
| Diameter | 160mm |
| Mounting type | Bottom |
| Controlling type | Lower limit and higher limit |
| Contact power | 10VA |
| Maxi al voltage | 220V D.C or 380V A.C |
| Explosion-proof grade | Exd II BT4 |
| Weight | 6kg |
| ENV Temp and Relative Humidity | -10~50°C, ≤80% |
| Temp Affect | ENV Temp deviate from 20±5°C, additional error ≤0.4%/10°C |
| Insulation strength | 50Hz sine alternating current 2000V will lasting for one minute |
Explosion-proof connection type and basis parameter
| Case volume V(L) | ＞0.5 | |
| Connection cover type | Plane | Cylinder (movable) |
| The min effective length of explosion-proof connection cover Lmm | 15 | |
| The Min effective length from bolt hole edge to explosion-proof connection L1 | 8 | |
| The Max interspale of explosion-proof connection or Diameter dispersion Wmm | 0.15 | |
| Falm-proof connection cover coarseness range Ra | 3.2 | 1.6 |
Comments:length and dispersion width referring to explosion- proof case chart
Explosion-proof shell and accessory of the conducting pressure system
| Accessory designation | Material brand or designation | Accessory designation | Material brand or designation |
| Shell cover outlet box | ZL102 (or ZL-102,ZL-101) | Thin gasket | L3 |
| Connector | 20 | ||
| Axis cover | QAI9-2 | Spring | 3J53 |
| Watching window | PMMA |
Comments concussion intension of watching window material is not over 4J. If watching window is broken, it can't be used anymore
