Guangdong ALI Testing Equipment Co,.Ltd |
|
Hydraulic Universal Testing Machine 3000kn For Tensile, Compression, Bending Test
Common test items:
Tensile stress, tensile strength, tensile strength, elongation at
break, constant extension stress, constant stress elongation,
constant stress force value, tearing strength, arbitrary point
force value, arbitrary point elongation, extraction force, adhesive
force and calculation value of peak value, pressure test, shear
stripping force test, bending test, extraction force puncture force
test.
Special test items:
1. The sex coefficient is defined as the elastic Young's modulus:
the ratio of normal stress component to normal strain in the same
phase. Is the coefficient of determination of material rigidity,
the higher the value, the stronger the material.
2. Proportional limit: the load can maintain a proportional
relationship with the elongation within a certain range, and the
maximum stress is the specific limit.
3. Elastic limit: the maximum stress that the material can bear
without permanent deformation.
4. Elastic deformation: After removing the load, the deformation of
the material completely disappears.
5. Permanent deformation: After removing the load, the material is
still residual deformation.
6. Yield point: when the material is stretched, the deformation
increases and the stress remains unchanged. This point is the yield
point. Yield points are divided into upper and lower yield points,
which are generally taken as yield points. Yield: the load
exceeding the scale limit is no longer proportional to the
elongation, the load will drop suddenly, and then in a period of
time, up and down, the elongation has a large change, this
phenomenon is called yield.
7. Yield strength: when tensile, the load of permanent elongation
reaching a specified value, divided by the original fault area of
the parallel part, the quotient.
8 spring K value: with deformation in phase of the force component
and deformation ratio.
Main Technical Parameter:
Item | Description |
Max. Force | 5T (50KN) |
Load cell | Germany brand load cell for high accuracy |
Control system | PC with windows 7 system |
Motor | Panasonic servo motor w/ DC variable speed drive system, high-precision mechanical ball screw rod |
Force reading | kgf, Ibf, N, KN, T etc |
Stoke | 1000mm including fixture |
Load cell Resolution | 1/250,000 |
Load Precision | within ±0.5% |
Test speed | 0.1~300mm/min (adjustable) |
Software | TM 2101 |
Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc… |
Safety features | E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
Software functions:
1. Use windows working platform, set all parameter with dialog forms and operate easy;
2. Using a single screen operation, do not need to change the screen;
3. Have simplified Chinese, traditional Chinese and English three languages,switch conveniently;
4. Plan test sheet mode freely;
5. Test data can be directly appeared in the screen;
6. Compare multiple curve data through translation or contrast ways;
7.With many units of measurement, the metric system and british system can switch;
8.Have automatic calibration function;
9.Have user-defined test method function
10.Have test data arithmetic analysis function
11. Have the function of automatic magnification, to achieve the most appropriate size of graphics
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Waiting for your inquiry about 1T Material Electric Tensile Strength Testing Machine With Panasonic Servo Motor, thank you