Active Member
|
[China]
Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong
Contact name:Kris
Guangdong ALI Testing Equipment Co,.Ltd |
|
|
Geosynthetics Wide Tensile Testing Machine Intelligent Touch
Interface
Application:
It is applicable for wide range of material for tension,
compression, bending, shearing and low cycle test. Suitable for
metal, rubber, plastic, spring, textile, and components testing. It
is widely used in the corresponding industries, research and
development, test institutes and training centers etc.
Standards:
ASTM D4595, BS EN ISO 10319, EN ISO 12236(GB/T14800), ASTM D5034,
ASTM D5035, ASTM D-4533, BS6906.1,GB/T16989
Features:
1. Smart touch interface, 5.7-inch super large screen, click at
will.
2. The load cell adopts a 0.5-level high-precision load cell.
3. Adopt the international high-end all-aluminum alloy shape
design, and the surface is treated with sandblasting and anodizing
process.
4. The Chinese and English dual interface can be switched
arbitrarily, and the test curve, graph, and data can be displayed
dynamically.
5. Adopt advanced digital signal processing (DSP) technology,
Philips 32-bit full digital control and 2500 f/s high-speed data
acquisition.
6. Taiwan precision pre-loaded ball screw, no backlash, high
positioning accuracy.
7. Non-clutch drive device, capable of running at full speed under
maximum force.
8. Fully comply with "Mechanical Equipment 2006/42/EC", "Low
Voltage 2006/95/EC", "EMC Directive 20044/108/EC" and GOST-R;
Technical specifications:
| Model | GSKA-010 | GSKA010D |
| Test method & Control | CRE principle, microcomputer control, LCD display, support for online | CRE principle, microcomputer & computer dual control, dual-screen display |
| Test load | 5KN;10KN; 30KN; 50KN | |
| Sampling frequency | 2500hz | 2500hz |
| Measuring force range | 1%~100% of full scale | 1%~100% of full scale |
| Force measurement accuracy | ≤±0.02%F.S | ≤±0.02%F.S |
| Stretching speed | 0.05-500mm/min | 0.05-500mm/min |
| Effective stroke of beam | 800mm Resolution: 0.01mm | 800mm Resolution: 0.01mm |
| Holder: wide strip tensile test | width 200mm; tear test: width 100mm | width 200mm; tear test: width 100mm |
| CBR burst test | φ50×100mm | φ50×100mm |
| Power supply: | AC220V±10% 50Hz 1.5KW | AC220V±10% 50Hz 1.5KW |
| Dimensions | 860×600×1800mm | 860×600×1800mm |
| Weight | 300kg | 320kg |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
We will produce the machines according to confirmed PO
requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
