Active Member
|
[China]
Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong
Contact name:Kris
Guangdong ALI Testing Equipment Co,.Ltd |
|
|
New Energy Vehicle Parts High And Low Temperature Environment Climate Test Chamber 1000L
Application:
New Energy Vehicles Auto Parts 1000L -80 degrees 10%RH High Low
Temperature Humidity Cycle Environment Climate Test Chamber, is
used for material performance test under different environment,
such as heat, cold, moisture, heat and moisture, mainly applied in
electronics, electrical appliances, mobile, communications,
instruments, vehicles, plastic products, metals, food, chemicals,
building materials, medical, aerospace and other industries.
Definition of new energy vehicles:
New energy vehicles is also known as alternative fuel vehicles,
include pure electric vehicles, fuel cell electric vehicles and
other vehicles that use all non-petroleum fuels, as well as hybrid
electric vehicles, ethanol gasoline vehicles and some other
vehicles that use non-petroleum fuels. All existing new energy
vehicles are included in this concept, which are divided into six
categories: hybrid vehicles, pure electric vehicles, fuel cell
vehicles, alcohol ether fuel vehicles, natural gas vehicles, etc.
New energy vehicle reliability test: including climate environment
test (including high and low temperature storage test, high and low
temperature operation test, warm storage and operation test,
temperature cycle test, thermal shock test, high and low
temperature limit test, IP protection test, salt spray test) and
mechanical environmental test (including vibration, drop test).
Guangdong Yuanyao Test Equipment Co., Ltd. can provide this series
of reliability environmental testing equipment, providing one-stop
testing equipment solutions for new energy vehicles and new energy
auto parts customers.
technical parameters:
| Model | GSKA-080 | GSKA-150 | GSKA-225 | GSKA-408 | GSKA-800 | GSKA-1000 |
| Inner chamber size W×H×D(cm) | 40×50×50 | 50×60×50 | 50×75×50 | 80×85×60 | 100×100×80 | 100×100×100 |
| Exterior chamber size W×H×D(cm) | 60×172×120 | 70×174×130 | 70×172×181 | 100×182×197 | 120×197×197 | 120×197×217 |
| Testing temperature range | -80ºC, -70ºC,-60ºC,-40ºC,-20ºC,0ºC~150ºC,Other temperature can be customized | |||||
| Testing humidity range | 20%RH~98%RH(Low humidity 10%RH~98%RH or 5%RH can be customized) | |||||
| Temp.humi.fluctuation | ±0.5ºC;±0.5%RH | |||||
| Temp.humi.uniformity | ±2ºC;±3% empty loading after stablize for 30mins ±2ºC;±3%RH | |||||
| Temp.humi.resolution | 0.01ºC;0.1%RH | |||||
| Heating&cooling time ºC/min | Heat-up:3ºC/min(average),cool-down:1ºC/min(average) | |||||
| Exterior chamber material | Cold rolled plate + Powder coating | |||||
| Interior chamber material | SUS#304 Stainless steel | |||||
| Insulation material | PU | |||||
| Circulation system | Centrifugal fan air circulation system | |||||
| Heating system | SUS# Stainless steel high-speed heater | |||||
| Humidification system | Electrothermal steam humidification | |||||
| Dehumidifying | ADP critical dew point cooling / dehumidifying method | |||||
| Refrigeration system | Compressor + Finned evaporator + Air(Water) cooling condenser | |||||
| Controlling system | Touch screen controller | |||||
| Other components | Vacuum glass observation window | |||||
| Test hole(50mm) | ||||||
| Controller status indicator | ||||||
| View light | ||||||
| Compartment shelf (2 freely adjustable) | ||||||
| Safety protection device | Overheat protection circuit breaker | |||||
| Humidification system overheat protection | ||||||
| Compressor overload protection | ||||||
| Control system overload protection | ||||||
| overload indicator | ||||||
| Phase sequence protection | ||||||
| Water shortage protection | ||||||
| High voltage and low voltage protection | ||||||
| Over temperature protection | ||||||
| Water supply delay protection | ||||||
| Fan overcurrent protection | ||||||
| Power supply | AC 1ψ220V;3ψ380V 60/50Hz | |||||
| Customization service | Non-standard or special requirements are all welcome | |||||
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
