|
[China]
Trade Verify
Address: Building No.2, Jinhui Photoelectric Industrial Park, Intersection of Paihe Avenue and Jixian Rd, Feixi, Hefei, Anhui, China
Contact name:LIU HUI
Hefei Jingpu Sensor Technology Co., Ltd |
|
Verified Suppliers
|
|
|
5k 8k Epoxy Coated NTC Thermistor 10K 25 C For Automotive Seat Heater
Brief Introduction:
Generally Teflon FEP wire, the color blue, yellow, green, etc. Its resistance value R25℃=5kΩ&8kΩ&10kΩ, B25/85=3988k&B25/85=3990k. This seat heater thermistor sensor is mainly used for temperature monitoring in the automotive seat heater.
Features:
Comply with RoHS standard
Wide Operating temperature range: -40℃~125℃
Application:
Automotive Seat heater
Part Number Code:
Structure and Dimensions:
| 1 | Chip | NTC Chip | 1 | / |
| 2 | Encapsulation | Epoxy resin | 1 | / |
| 3 | Cable | Teflon PFA 28AWG (19/0.08) OD0.84 or Teflon PFA 28AWG (19/0.08) OD0.65 | 2 | / |
Standard packing (inner packing): 500pcs/polybag
Electrical Specification:
| Rec. at 25℃(kΩ) | Beta value | (In air) Pmax(mW) | δ(mW/℃) | Thermal time constant τ(sec.) | Operating Temperature Range TL-TH(℃) | Total length L(mm) |
| 1 | B25/85=3435 | Approx.60 | Max.3.0 | Max.20 | -40℃~125℃ (Teflon wire) | 13.5~1000 |
| 1.5 | B25/50=3850 | |||||
| 1.5 | B25/50=3935 | |||||
| 2 | B25/85=3550 | |||||
| 2 | B25/85=3935 | |||||
| 2.08 | B25/85=3580 | |||||
| 2.2 | B25/50=3935 | |||||
| 3 | B25/50=3950 | |||||
| 5 | B25/50=3470 | |||||
| 5 | B25/50=3950 | |||||
| 8 | B25/100=3988 | |||||
| 10 | B25/85=3435 | |||||
| 10 | B25/50=3470 | |||||
| 10 | B25/50=3935 | |||||
| 10 | B25/50=3950 | |||||
| 20 | B25/50=3950 | |||||
| 47 | B25/50=3950 | |||||
| 50 | B25/50=3950 | |||||
| 50 | B25/50=4200 | |||||
| 100 | B25/50=4200 | |||||
| 200 | B25/50=4200 | |||||
| 500 | B25/50=4450 | |||||
| 1000 | B25/85=4600 |
Operation Notice:
1. Application: Temperature measure and control；
2. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.
3. Avoid excessive heat shock, The hot air blow should beat at least 30mm to the probe in case a heat-shrink protection tube needs to be attached.
4. Storage Temperature -10℃～40℃,≤75%RH； Avoid a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.
You may also like:
