Climatic Environmental Cold And Heat Shock Test Chamber For Metal And Plastic

Climatic Environmental Cold and Heat Shock Test Chamber Equipment For Metal And Plastic

Programmable Three Zones Thermal Shock Test Chamber are applicable for testing the changes in physical of the electronic chip IC, PCB, semiconductor ceramic and polymer materials. And composite material and material structure's result which under continuous environment with high temperature or low temperature shock in short time; it means this product can test the material's chemical change or physics change by expansion and contraction within short time. It's application to metal, plastic, rubber, food, electronic etc.alternation environment.

High memory capacity,can set 120 programs and each program can be repeated for max 9999 times.Each step can be proceeded for max 999 hours and 59 minutes.It's able to communicated with computer via RS485 port,so as to control,edit and record 2 groups of dynamic nodes,easy to operate.

QTS3 series air-to-air thermal shock chambers circulate cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the set point, allowing quicker recovery of the desired condition after transfer.

QTS3 Features:

1. Automatically setting of pro-cooled and pre-heated air.

2. Testing samples don’t move, cable port is available for power on testing.

3. Powerful interactive touch screen controller, easy operation and setting

4. High accurate temperature recovery with PID auto tuning

5. Auto defrost function

6. System alarms are stored in memory for historical review

7. Operation data can be downloaded as needed, or continually, to USB

8. Energy saving, low consumption, low noise design.

9. Lowest error, high speed, test samples exposure smooth.

Testing Standards:

MIL-STD-883E Method 1011.9 Thermal Shock

MIL-STD-202G Method 107G thermal Shock

JIS C 0025 Change of temperature

IEC 61300-2-47 Tests-Thermal Shocks

JESD22-A104C Temperature cycling

GB/T 2423.22-2012 Test N: Change of temperature

GB/T 2431.1-2001 Testing A: Low temperature testing method
GB/T 2431.2-2001 Testing B: High temperature testing method

GB 11158 High and low temperature test term

Model Selection:

Specifications: