Simulation Environment Alternate Temperature Humidity Test Chamber for Quality Control

Cold Balanced Control System Simulation Environment Alternate Temperature Humidity Test Chamber for Quality Control

Temperature humidity chamber can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry, resist humidity and resist cold. That can define performance of material. It is simple to operate and program easy to edit. It can show the set values and operative time.

Cooling Method of Climate Test Chamber: Air cooled or water cooled?

This might be an easy decision: With water cooled condensers, the chamber requires a dedicated conditioned waterline. All chambers can be air or water cooled however water cooled units will lower the temperature in the chamber workspace faster than an air cooled chamber.

Features:

1, Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel ,mirror finished with excellent heat resistance and easy to clean.

2, Controller imported LCD display screen can be displayed measuring values and setting the value and time.

3, Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.

4, RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.

5, Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions.

6, Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.

7, Left and right side of chamber with diameter 100mm cable port for power-on test.

8, Optional electronic humidity sensor is used on all test chambers for accuracy and minimal maintenance.

9,The French Tecumseh brand is used for the circulation system of the compressor, more effective removal of oil between the condenser and the capillary and use environmentally refrigerants ( R23, R404, R507).

10.Completely independent system separate for testing in high temperature, low temperature and constant temperature&humidity environment

11.Water supply system that is externally connectable, convenient for refilling water into the humidifying tank and automatically recyclable chamber

Test standards:
GB/T2423.1-2001 test A: Low temperature (part)
GB/T2423.2-2001 test B: High temperature (part)
GB/T2423.3-2006 test Cab : Steady damp-heat
GB/T2423.4-1993 test Db: Alternating humid heat
GB/T2423.34-2005 test Z/AD: Temperature and humidity combination
GB/T2423.3,4 requirements for the heat and humid heat cycle of the medium steady state
GB/T5170.2-2008 electric and electronic products environmental testing equipment method temperature test equipment
GB/T5170.5-2008 electric and electronic products environmental testing equipment method hygrothermal test equipment.

IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method

IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method

IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method.

MIL-STD-202F (GJB360.8-87) High temperature life testing

MIL-STD-810D (GJB150.9-93) Moist heat testing method

Technical Specification: