Active Member
|
[China]
Address: No. 88, Jiaolian Yiheng Road, Wanjiang district, DongGuan, China (523046)
Contact name:Andy DAI
DongGuan Q1-Test Equipment Co., Ltd. |
|
|
Hardness Conversion Digital Barcol Impressor with Balance Positioning and Bluetooth
Brief Introduction:
The Barcol Impressor meets the following ASTM (American Society for Testing and Materials) standards: E140-97; D2583-75; B648-78: E140-97 Standard Hardness Conversion Tables for Metals;
D2583-75 Standard Method of Testing for Indentation Hardness of Plastics by means of a Barcol Impressor;
B648-78 Standard Method of Testing for Indentation Harness of Aluminum Alloys by means of a Barcol Impressor.
It is mainly used in aluminum processing industry. Also, it can be used for glass steel industry.
Features:
* It is characterized in that provided with a balance positioning, a digital display of hardness value, and a non disassembly calibration and adjusting.
* It is with good stability, convenient calibration, and high accuracy of detection.
* Small in size, portable. Single hand operation, easy to use. Can be used in any occasion as long as the hand can reach.
* Wide test range, can test from very soft pure aluminum to a particularly hard aluminum alloy. effective test range equivalent to the Brinell Hardness of 25~150HB.
* No need to support. The hardness tester is only tested on one side of the sample without support.
* Can be used for measuring not only Barcol Hardness, but also Brinell Hardness (HB), Vickers Hardness (HV), Webster Hardness (HW), Rockwell Hardness (HRB/HRE/HRF/HRH).
* With the maximum hold function, hold the maximum hardness value during measurement.
* With the function of calculating the average value, and the average value of the 29 sets of data are calculated at most.
* Provide Bluetooth data output choice.
Specifications:
| Range | 0~100Hba,Amount to 25~150HBW |
| Resolution | 0.1HBa |
| Indication Error | 81~88Hba±1Hba |
| 42~48Hba±2Hba | |
| Repeatability Error | 81~88Hba±1.5Hba |
| 42~48Hba±2.5Hba | |
| Brinell Hardness | √ |
| Vickers Hardness | √ |
| Wenster Hardness | √ |
| Rockwell hardness | √ |
| Maximum Hold | √ |
| Average Calculation | √ |
| Operating Condition | Temperature:0~50ºC Humidity:<80%RH |
| Power Supply | 2x1.5V AAA(UM-4)Battery |
| Dimensions | 170x63x82mm |
| Weight | 390g(Not Including Batteries) |
| Standard | Main Unit |
| Accessories | 2 Pins |
| 2 Standard Blocks | |
| Pin Length Calibration Block | |
| Screw Driver | |
| Spanner | |
| Carrying Case | |
| Operation Manual | |
| Optional | Bluetooth Data Adapter with Software |
