|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
Description
IPX8 IEC60529 waterproof tester used for the testing of IPX8. Under the device with shell protection grade (IP code) based mainly for electronic and electrical products, outdoor lighting, electric cabinet, communication equipment, diving equipment and other products to simulate the water environment to test the protective performance of IP products. The test result are used to determine whether the requirements are met, so as to provide the design, development, optimization and ex factory inspection of the product.
Main Technical Parameter
Name | Immersion Test IPX8 IEC 60529 Waterproof Tester |
Internal dimension | Diameter 600mm *Height 1500mm. |
Chamber material | SUS#304, thickness 2.5mm |
Water depth | Simulate 50m depth by air compressor |
Water pressure | Ambient to 0.5MPa, pressure gauge accuracy 0.25 degree |
Timer | 0 ~ 99min, 99sec |
Sample lift device | Portable stainless steel basket |
Water level display | Water pipe with scale |
Open mode | pneumatic lift with safety lock. |
Protection device | Pressure protection and anti-explosive device, water drain and pressure release device |
Safety protection | Power overload protection, short circuit protection, grounding protection, alarm display |
Nominal power | 3500W |
Power Supply | AC380V 50HZ |
Configuration
|
|
Test Area and specimen holder
| Safe Lock |
|
|
Control Panel
| Automatic water inlet |
Standard:IEC60529 degree of protection provided by enclosures (IP Code) of the IPX8, IEC60884-1, IEC60335-1, IEC60598-1.
Features
1. Applicable to the IPX8 waterproof rating test of the product.
2. Ipx7 waterproof tester,The tank body is made of 304 stainless steel material, high-precision overall sub-arc welding, good pressure bearing.
3. The outside is a square structure, welded by stainless steel plate, user-friendly design: 45 ° bevel method, button operation; the lid height is moderate, easy to operate.
5. The top cover of the equipment is fixed with 8 sets of ring screws (distribution auxiliary steel bars).
6. IEC60529 Ingress Protection tester is equipped with a safety valve. After the rated pressure is exceeded, the pressure is automatically released to prevent the operator from operating improperly and the set pressure is too high.
