Hot Dip Galvanized High Voltage Transmission Towers , Steel 500 Kv Transmission Tower

Transmission Steel Tower , Hot Dip Galvanization Angle Steel Lattice Tower

1.   Production decription

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer

in the field of transmission steel towers (the voltage up to 1000kv), telecommunication towers, monopoles,

substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual

production capacity 40,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.

Welcome to contact us ,we make sure your every question will be answered in time .

Transmission  steel towers voltage :         10-1000KV(10KV/33KV/66KV/110KV/220KV/330KV/500KV/

                                                              750KV/1000KV)

Tansmission steel tower type :                  crossing tower , angle tower,terminal tower ,transposition tower ,

                                                               branching tower 

Material of the transmission steel tower :   GB/T:Q235B, Q345B, Q420,
                                                                ASTM : A36,A572 GR50, GR65,
                                                                BS/EN :S355JR,S235JR

Height of the transmission steel tower :       8-100m

Galvanization :                                          According with Chinese standard GB/T 13912-2002 Which is equal to

                                                                American standard ASTM A123.

Fasteners grade :                                      4.8,6.8 ,8.8

Catalogue of the transmission line towers as followings :

2.   Product capacity

We have 5 production line for manufacturing transmission steel towers ,We can supply 3000 tons steel towers

per month .And we have enough room to place more transmisson steel towers production line if needed .

​

​3.  Technical support

Our engineer and drawer has lots of designing ,lofting experience of transmission steel towers .

Which we can supply a overall solution of all the towers .

4.   Quality control

We have very strict quality control in every tranmsission steel towers .

                    Material incoming control:chemical and physical test

                                   Zinc coating thinknes inspection

We usually has two ways of trial assembly for tranmsmission steel towers : trial assembly before galvanzation

and after galvanization

6.  Hot dip galvanization and painting

7.  Package and delivery

Package we usually do as our clients requirment .Usually for transmission steel towers,we fixed angle steel by

steel wire to bundles and use special material to protect zinc .

For fasteners ,we use bucket ,bag or box.

8.  Product catalogue: