|
[China]
Trade Verify
Address: No 803，Unit 3 ,DaDou Road, Huihao Building .Fangshan District,Beijing,China
Contact name:Lee
Beijing Ding Ding Future Technology Co.Ltd |
|
Verified Suppliers
|
|
|
Eltek Smartpack S Panel Mount monitoring for remote control with
SNMP, RS232.RS485 (Part No.:242100.415)
The Smartpack S covers all control and monitoring needs of small to medium telecomand industrial dc power systems. Status and configuration is fully available through thedisplay locally, or through the Ethernet plugboth remote or locally.
Parameters :
| TECHNICAL SPECIFICATION | ||
| Model | Smartpack S – Panel Mount | |
| Part number | 242100.415 | |
| INPUT DATA | ||
| Voltage (nominal) | 10 - 75 VDC | |
| System output grounding | Supports positive, floating and negative distributions. All inputs are referenced to shunt. | |
| Power Consumption, max - no relays energized max - all relays energized | 3,1W (display sleep) 5,5W (display on) | |
| SYSTEM CONNECTIONS - SYSTEM MONITORS | ||
| Voltage sense, system voltage support | 12 VDC, 24VDC, 48VDC & 60VDC | |
| Current sense, shunt support | 0 - 20mV and 0 - 60mV | |
| Battery fuse monitoring | Auxiliary switch NO/ NC, Pull up/down | |
| Load fuse monitoring | Auxiliary switch NO/ NC, Diode Matrix Pull up/ down | |
| Ground fault detection | Simple bridge circuit detection [Tolerance: ±10%, alarm range: 25 kΩ – 500k Ω] | |
| Fan speed monitoring | Tacho sense 0 -65000 rpm [Input max. 15V] | |
| SYSTEM CONNECTIONS - LVD CONTROL | ||
| Battery disconnect | 1 (latched or non -latched supported) | |
| Load disconnect | 1 (latched or non -latched supported) | |
| INPUTS AND OUTPUTS | ||
| Digital configurations, Inputs #1 -6 | Auxiliary switch: NO/ NC Temperature (for NTC probe) | |
| Analog configurations, Inputs #1 -4 | Analog Voltage[±0 - 10V] ±4-20mA current measurement (through external 470k Ω resistor) | |
| Analog configurations, Inputs #5 -6 | Analog Voltage[0 -75V] Symmetry measurement | |
| Output configurations, Outputs #1 -6 (alarms) | 6x Relay–Dry/ Form C Configurable Normally Open/ Closed [Max capacity 75V/2A/ 60W] | |
| Fan Control | Analog Voltage [ 0 - 10V] Output Current 0 - 20 mA Fan Input Impedance minimum 10 k Ω | |
| CAN Power Available for Eltek CAN Nodes | 500mA | |
| USER INTERFACE | ||
| Local | 2.2” TFT 65k Colour display, QVGA resolution, 4 keys | |
| Ethernet port | 10/ 100 BASE-T (HP Auto MDI/ MDI-X) IP protocols: HTTP / SSL, SNMP v3, MODBUS TCP and pComm UDP (PowerSuite) | |
| Serial port | RS-232 and RS-485 on RJ11 connector Serial protocols: MODBUS RTU, Modem Call-Back/SMS reporting (PSTN or GSM), COMLI, CSCP and pComm (PowerSuite) | |
| GENERAL SPECIFICATIONS | ||
| Dimensions (WxHxD*) * depth behind panel | 232.2 x 76.2 x 33.0 mm (9.1 x 3 x 1.3 ”) | |
| Temperature Range | Operating -20 to +65 ˚C (-40 to 149 ˚F) | |
| DESIGN STANDARDS | ||
| Electrical safety | UL 60950 -1-3rd edition, EN 60950 -1-3rd edition | |
| EMC | ETSI EN 300 386 V.1.4.1 EN 61000-6-1 / -2 / -3 / -4 FCC Part 15 Subpart 109 | |
| Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) ROHS compliant | |
Related products :
Solutions
We provide a complete solutions including site survey, propose
professional plan according to customer’s request ,technical
support, and maintenance service for Telecommunication Companies in
and out of China. We have a competent team and a network of trusted
Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios,
load and full load and current sharing test to ensure the quality
of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The
only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction
document later to give you a more comprehensive and direct
introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent
renewal of supply, flexible provided according to different to
different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and
the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It
has already had a certain reputation. We will carefully analyze it.
If it is indeed our quality problem, you can rest assured that it
will do things according to the contract agreement and will never
let you have any after the worries, our service team will be happy
to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before
posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad
quality products within guarantee time.
