|
[China]
Trade Verify
Address: No 803，Unit 3 ,DaDou Road, Huihao Building .Fangshan District,Beijing,China
Contact name:Lee
Beijing Ding Ding Future Technology Co.Ltd |
|
Verified Suppliers
|
|
|
Eltek Solar Charger Flatpack2 48/3200 HE Solar Flatpack2 HE solar 3200W Flatpack2 48V solar charger (241119.650 )
Eltek Solar Charge Extension Kit 2U/3U shelf with Flatpack2
48/3200HE Flatpack2 48/1500HE (CTZ00000.1358 )
Solar Extension Kit - 2U /3 U shelf solution
Specially designed with the MC4 connectors for cables from PV panels, service switches and optional SPDs. The front and rear MC4 connection mechanism enables easy on-site installation into both outdoor and indoor enclosures.
Key features
Parameters :
| MODEL | 2U SOLAR EXT. KIT | 3U SOLAR EXT. KIT | ||||
| Part number | CTZ00000.1358 | CTZ00000.1255 | ||||
| POWER MODULES | ||||||
| Flatpack2 Solar Charger 1) | Flatpack2 48/3200 HE Solar | |||||
| Peak efficiency | 97 % | |||||
| Max no. of modules | Up to 2pcs | Up to 4pcs | ||||
| INPUT DATA (SOLAR CHARGER) | ||||||
| Voltage (operating range) | 85-420 VDC | |||||
| Voltage (MPPT range) 2) | 100-380 VDC | |||||
| Voltage (start-up) | 150 VDC | |||||
| Maximum current | 20.3 ADC | |||||
| Protection | Fuse, varistor for transient protection, reversed polarity, shutdown when VIN is too low, earth fault check during start-up | |||||
| PV CONNECTION PANEL | ||||||
| Service switches for PV arrays | 2 pcs 2-pole | 4 pcs 2-pole | ||||
| MC4 connectors | 4 pcs (2 pcs per one PV array | ) 8 pcs (2 pcs per one PV array) | ||||
| DC SPD (option) | Up to 2 pcs (Type 1+2) | Up to 4 pcs (Type 2) | ||||
| OUTPUT DATA | ||||||
| Voltage (default) | 53.5 VDC | |||||
| Voltage (adjustable range) | 42 3) - 57.6 VDC | |||||
| Max power, VIN ≥ 170 VDC | 6400 W | 12800 W | ||||
| Max current, @VOUT = 48 VDC | 133 A | 266 A | ||||
| Protection | Overvoltage shutdown, short circuit proof, high temperature, hot plug-in inrush current limiting | |||||
| OTHER SPECIFICATIONS | ||||||
| Alarms (Red LED) | High and low temperature shutdown, Converter Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure | |||||
| Warnings (Yellow LED) | Low input voltage, Converter in power derate mode, Remote current limit activated, Input voltage out of range, flashing at overvoltage | |||||
| Normal (Green LED) | Input and output ok | |||||
| Operating temperature | -40 to +75 °C [-40 to +167 °F] 3) | |||||
| Storage temperature | -40 to +85 °C [-40 to +185 °F | |||||
| Dimensions (W x D x H) 5) | 482 x 384 x 89 (2U) mm [19 x 15.1 x 3.5 inch] | 482 x 384 x 133 (3U) mm [19 x 15.1 x 5.3 inch] | ||||
| Weight (excluding modules) | Approximately 7 kg [15 lbs] | Approximately 10 kg [22 lbs] | ||||
| DESIGN STANDARDS | ||||||
| Electrical safety | EN 60950-1:2006/A2:2013, EN 62368-1:2020/A11:2020, EN 62109-1:2010/-2:2011 | |||||
| EMC | ETSI EN 300 386 v1.3.2 EN 61000-6-1:2019, EN 61000-6-2:2019, EN 61000-6-3:2007/A1:2011/AC:2012, EN 61000-6-4:2019 | |||||
| Environment | ETSI EN 300 019-2-1 v2.3.1:2017 (Class 1.2) ETSI EN 300 019-2-2 v2.4.1:2017 (Class 2.3) ETSI EN 300 019-2-3 v2.4.1:2015 (Class 3.2) ETSI EN 300 132-2 v2.6.1:2019 Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised | |||||
1) See Flatpack2 Solar charger datasheet for details 2) At nominal output voltages. MPPT will operate down to 100V, but the maximum input current limitation will de-rate maximum output power 3) Stand-by / test operation (VOUT < 48 VDC) limited for VIN > 250 VDC 4) +45 to +75 °C [+113 to +167 °F] with de-rated performance 5) Recommended minimum cabinet depth is 400 mm [15.7 inch] | ||||||
Related Products :
Solutions
We provide a complete solutions including site survey, propose
professional plan according to customer’s request ,technical
support, and maintenance service for Telecommunication Companies in
and out of China. We have a competent team and a network of trusted
Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios,
load and full load and current sharing test to ensure the quality
of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The
only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction
document later to give you a more comprehensive and direct
introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent
renewal of supply, flexible provided according to different to
different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and
the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It
has already had a certain reputation. We will carefully analyze it.
If it is indeed our quality problem, you can rest assured that it
will do things according to the contract agreement and will never
let you have any after the worries, our service team will be happy
to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before
posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad
quality products within guarantee time.
