Semi Automatic Round Single Side Self adhesive Sticker Labeling
Machine for flat bottle
Roll inner diameter
Roll outer diameter
left to right or right to left
220V 50Hz 2.5kw
at least 5pa
Container forms have become diverse and labels are now used for
many types of containers such as plastic, glass, or metallic ones.
When using labels, illustrations and logos are printed on the
reverse side of a film. Labels are very effective for enhancing a
products appeal, since the whole label can be used to display the
- Food and Beverage (Sauces, Spread, Prepared meal, Snacks, Soft
drinks, Fruit juices, Water, Alcoholic drinks, etc.)
- Dairy (Milk-based drink, Yogurt drink, Yogurt Cup, Coffee creamer,
Ice cream, etc.)
- Nutrition product/Supplement (Baby food, Healthy foods, etc.)
- Home care (Laundry, Fabric care, Detergent, Cleaning products,
- Personal Care (Hair care, Soap and Bath products, Oral care, Skin
care, Cosmetics, etc.)
Taiwan Mean Well
Bottle separating regulator
B: Mechanical part:
- Main conveyor: AC motor with inverter based speed control.
- Product separator: motor with solid state speed control.
- Product clamping unit: motor with inverter based speed control
synchronized with the main conveyor.
- Overhead belt: umbrella gear driven synchronized with the main
- Label pressing flap: Metal lamina, sponge & imported adhesive
- Together to ensure even labeling without any distortion.
- Passive pressing sponge roller: To ensure air bubble or wrinkle
- Active pressing sponge roller: motor with solid state speed
- Product guide trail: Stainless steel material, Adjustable in 2
2. Machine’s performance & comparison with other labeling
- With innovative & patented technology applied in the machine
with the use of highly reliable motor, controlled in a feedback
loop using PLC under the command of user friendly touch screen
based human interface, the label feed rate can be changed in steps
of 0.01m/min. This leads to 100 times more accurate performance
compared to other labeling machines made in China, which are still
at step of 1m/minute while changing the label feed rate.
- The line conveyor is driven by high-power imported AC motor with an
inverter based speed control ensure stable conveying of bottles,
thus further enhancing labeling precision.
- Exclusively applies elastic macromolecule overhead pressing belt
and gear in the main transmission system, making sure they’re
absolutely kept in synchronism. Also solid structure of the
overhead belt prevents product sway while labeling.
- The position of product sensor in the machine is adjustable, making
it possible to realize zero delay. This greatly increases labeling
accuracy. In most of other labeling machines, product sensor is not
adjustable hence use delay control instead leading to compromise
with labeling accuracy. Variation in operating voltages or change
in load on transmission system will lead to big labeling offset in
- Product clamping unitThe machine incorporates specially designed
nylon chain with smooth surface to clamp the product flatly &
exactly without any scratch. With total four fix points, the offset
is less than ±0.5 mm.
- Product separator unitSunswell machine employs couple of opposite
rotating sponge rollers on either sides of the line and can be set
to run at different speed then that of the conveyor speed resulting
in separation of products. This method is of good effect and can be
easily applied in many situations. No need of replacement when
- Label applicator can be adjusted on 6 different axis because of
which one can freely adjust labeling position and angle. This is
especially valuable when labeling difficult transparent label on a
variety of profiles of product surfaces.
- Combination of elastic label flap + passive sponge rollers’ 1st
press + active sponge rollers; 2nd press makes sure no air bubble
or wrinkle occurred while labeling.
Feature of circle labeling device:
- Adopt pneumatic bottle fixing system, three rollers automatic
fixing system while labeling, make sure higher labeling accuracy;
- 1 label or 2 labels optional ;