Active Member
|
[China]
Address: No.102, B Block,Hytera Science and Technology Park, No.3 Baolong 4th Road, Longgang Dist, Shenzhen, China 518116
Contact name:Helen He
tecsis (Shenzhen) Sensors Co., Ltd |
|
|
Stainless Steel Tension Compression Load Cell For Hopper Scale
Features :
Description:
F2818 Force transducer is a rod end load cell.
The capacity is 1KN~500KN.
With strain gauge technology.
There is a thread on one side and there are a plate on the other side. The structure makes it easy to install and to use.
It can measure tension and compression force.
It is made of 17-4PH stainless steel, the protection class is IP66, based on these features, it can be used in many humid environment.
Mainly used for easy installed micro miniature tension and pressure test equipment, crane scale, level indicator, automobile seat weight sensor and other force measurement.
Applications:
Mainly used for easy installed micro miniature tension and pressure test equipment, crane scale, level indicator, automobile seat weight sensor and other force measurement.
Technical parameters:
Specifications | Technique |
Rated output | 1.5±10%mV/V |
Zero balance | ±2% F.S. |
Non-linearity | ≤0.5% F.S. |
Hysteresis | 0.1% F.S. |
Repeatability | 0.1% F.S. |
Creep (30min) | 0.1% F.S. |
Temp. effect on output | 0.05% F.S. / 10ºC |
Temp. effect on zero | 0.05% F.S. / 10ºC |
Input impedance | 385±30Ω |
Output impedance | 350±5Ω |
Insulation | ≥5000MΩ / 50VDC |
Recommended excitation | 5V |
Maximum excitation | 15V |
Compensated temp. range | - 20~60ºC |
Operation temp. range | - 40~80ºC |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Cable size | Ø5*1500 mm |
Protection class | IP66 |
Cable color code | Input: Red(+) Black(-); Output: Green(+) White(-); |
Size and capacity:
Schematic Wiring Diagram :
