Home Companies Qingdao Exceed Fine Chemicals Co.,Ltd

White Solid MDI/Polyester Prepolymer Hardness 95

Qingdao Exceed Fine Chemicals Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: No.166, Zhengyang Middle Road, Chengyang District, Qingdao City, Shandong Province, China. 266000

Contact name:Louis.liu

Inquir Now

Qingdao Exceed Fine Chemicals Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

White Solid MDI/Polyester Prepolymer Hardness 95

Country/Region china
City & Province qingdao shandong
Categories Chemical Reagents
InquireNow

Product Details

White Solid MDI/Polyester Prepolymer Hardness 95

 

1.Description

This is an MDI-terminated PET prepolymer of low viscosity and easy processing. It enjoys a high performance and high abrasion resistance.

 

2. Application

It applies to make PU rods, castor wheels, PU pad, PU sheet, rubber roller, sieve plate, etc.

 

3. Product Specification

 

NCO Content (%)9.0±0.2
Density (25℃)/(g/cm3)1.24
Viscosity at 85℃ (Mpa.s)1000
Appearance at 25℃White solid

 

4. Operation introduction

 

Ratio (Prepolymer/1,4BDO)100/9.3
Mix temperature/℃ (Prepolymer/1,4BDO)80/40
Gel time/min7
Postcure (110℃)/h48

 

5. Physical Properties

 

Hardness/ shore A95±1
Tensile Strength/ Mpa55
100% Modulus/MPa12.3
300% Modulus/MPa29.1
Elongation at break/%530
Tear strength (without nick) / kN/m132
Tear strength (with nick) / kN/m57
Rebound/%39
DIN Abrasion(mm3)38

 

6. Shelf life

The storage time of original packing is 6 months at the above condition from the date of production.

 

7. Package

20kg or 200kg per steel drum

 

8. Safety

Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.

If Contact Occurs:

Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Seek medical attention if allergic reactions occur.

Eyes: Immediately flush with water for at least 15 minutes, contact a physician.

Ingestion: If swallowed, contact a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as directed by medical personnel. Never give anything by mouth to an unconscious person.

 

Hot Products

TDl / Polyester Polyurethane Preploymer Hardness 72 1. Description This is a TDI-terminated PET ...
TDl / Polyester Polyurethane Preploymer Hardness 60 1.Description This is a TDI-terminated PET ...
TDl / Polyether Polyurethane Preploymer Hardness 70 1.Description This is TDI-terminated PPG ...
TDl / Polyester Polyurethane Preploymer Hardness 96 1.Description This is TDI-terminated PPG ...
Low Free TDl/Polyether Prepolymer Equivalent to Desmodur E15 1. Description LFE245 based on TDI - ...
White Solid MDI/Polyester Prepolymer Hardness 85 1.Description This is an MDI-terminated PET ...