|
[China]
Trade Verify
Contact name:TBC LED
Topbright Creation Limited |
|
Verified Suppliers
|
|
|
Outdoor Small Pitch LED Display P1.875mm 4000nits High Brightness 3840Hz
Application Of Outdoor P1.875mm 4000nits brightness LED Display
With the development of the times and the improvement of people's living standards, people put forward higher requirements for the display effect of display devices. The LED display screen with clear image and high color reproduction is favored by people nowadays, and it is also the development trend of LED display screen in the future. In the field of LED display, small pitch LED display is shouldering such a mission, and after recent years of technological development, it is spreading in the market with extremely rapid momentum. In 2016, the small pitch LED display market was extremely hot, becoming the most dazzling star in the LED display market. Its strong momentum further demonstrates the huge demand for high pixel level displays in the market. In this sense, the outdoor market traditionally dominated by in-line LED displays will also be the leader in the small pitch LED display market.
With the launch of TBC LED outdoor 1212 RGB SMD products, it marks that outdoor small pitch displays have really entered the P1. X era (theoretically, the minimum outdoor point spacing can reach P1.5). This product is mainly used in outdoor small pitch displays such as medium and high-end advertising light boxes, signboards, stage backgrounds, commercial exhibitions, etc. TBC LED outdoor 1212 RGB products have a full black design and provide a common cathode and common anode packaging type; In terms of quality reliability, it can be guaranteed by the humidity sensitivity level test MSL>1000 cycles, IPX6 moisture proof design, and a three-year warranty.
Quick detail Of Outdoor P1.875mm 4000nits brightness LED Display
1, Pixel Pitch: 1.56mm
2, SMD1010 LED, high contrast and high refresh rate
3, Greyscale: 16bits
4, Cabinet size: 480x540mm Die Cast Aluminum
5, Recommended Viewing Distance: 1-3m.
6, Cabinet Material: Die Cast Aluminum Cabinet, 8kg Light Weight
7, Refresh Rate: 3840Hz
8, Quality Certificate:CE, RoHS,FCC, ETL
9, Brightness:>4000cd/sqm
10, Quick Installation: Yes, fast side lock for quick assembly and disassembly
Specification Of Outdoor P1.875mm 4000nits brightness LED Display
Product Unit Parameters Parameters | |
| Mode | P1.56mm |
| LEDs | 1R1G1B |
| LED type | SMD1010 |
| Pixel pitch | 1.56mm |
| Unit size | W480×H540mm |
| Unit resolution | 312×351 dots |
| Resolution | 409,600dots/㎡ |
| Unit direction | Vertical Horizontal |
| Brightness | ≥4000nit |
| Weight | 8KG/㎡ |
| Max consumption | 500W/㎡ |
| Adv consumption | 230W/㎡ |
| Viewing angle | H120°/V120° |
| Protection level | IP65 |
| Thickness | 80mm |
Heat dissipation
| Convective heat dissipation |
| Power supply | Power supply with PFC |
| Installation | Fast install |
| Service | Front |
| Control mode | steady state |
| Color temperature | 3200-9300K |
| Refresh rate | 60Hz |
| Working temperature | -40℃ to 70℃ |
| Storage temperature | -55℃ to 120℃ |
| Life time | ≥100,000 hours |
| Input voltage | AC110-220V |
| Grey grade | 16bit |
Features Of Outdoor P1.875mm 4000nits brightness LED Display
1. Unit display case with 16:9 design, HD display point to point,
no distortion and no compression of images.
2. Full front maintenance design, small installation space.
3. Ultra-thin design of the screen body, the thickness of the whole
box is less than 40mm.
4. Secondary power supply design, the box power supply for low
voltage, the use of high-efficiency module power supply, small heat
generation.
5. Box power supply without cascade output, reducing the risk of
failure of the connector.
6. Module intelligent detection (single-point detection, fault
warning, temperature detection, etc.) and data storage functions
(calibration data storage, production data storage).
7. Module using magnesium alloy die-casting bottom case, good
flatness, bottom case and PCB and IC close together, good heat
dissipation.
double backup design for control card and power supply, which can
be applied to various demanding places.
8. Module and HUB adopt board-to-board professional connectors for
more reliable performance.
system card can realize front and back maintenance.
9. The signal connection between the boxes adopts hidden HDMI
docking, with more reliable performance and neat and clean rear
part of the screen assembled.
10. High gray scale, high refresh, high contrast, low brightness
design.
Our Services
1. 10 Years professional led display manufacturer
2. Short delivery time: 5-15 working days, adjustable according to
customer request
3. Wholesale price
4. OEM and ODM service
5. Customizable product upon request
FAQ
Q1. How does the service work?
A: We have experienced Engineers who worked in the industry for 15 years and able to communicate with fluent English. They can remotely provide technical support via video conference or teamviewer or go to the site for the guidance.
A: Wall mounting with metal structures.
A: Low MOQ, modules or complete screen order are all welcome.
A: Air freight, sea and train transport according to different region.
A: Mostly we accpet telegraphic transfer, 50% before production and 50% balance before shipment.
A: We manage quality starting from incoming material, all leds, ICs and PSU are pre-inspected then go to the production line.
The modules and complete screen will have at least 72 hours aging test, to make sure stable quality and performance.
A: We provide 1-3 years warranty for different product. Free Repair or Exchange of Defective Parts with One way Shipping
