Anti-Abrasion Inflatable Floating Rubber Boat Dock Rubber Fenders
Pneumatic Rubber Fender
The fenders are also called inflatable fenders, has the following
characteristics:
1. High energy absorption
The energy absorption is the main technical data of the pneumatic
rubber fender. As the tonnage of the ship increases, the impact
energy of the ship contacting the shore or other vessels increases
exponentially during berthing operations. The huge impact energy
must be absorbed by the full deformation of the fender and
sufficient contact area. Our pneumatic fender compression
deformation could be more than 60%, and the contact surface area
expanding by the compression deformation increasing. This fenders’
energy absorption ability is much more than other type fenders.
2. Super low reaction force
We fill the low pressure air inside the inflatable fenders, so the
inner pressure is increased limited during the compression
deformation.
Due to the large contact surface, so the pressure to the ship unit
area is low. Compared with other ship fenders, this is not only a
low reaction force
3. The inclined contact is good during the operation
For ships, there must be a certain angle of access to the shore and
the possibility of connecting the ship. Our inflatable pneumatic
fenders are much more adaptable to inclined contacts than other
fenders.
4. The rubber pneumatic fender will be floating on the water, even
the ship swings, it can be applied.
Inflatable fenders float on the surface of the water ( over 50% of
the body area). And by the tiding, the fender position will not
change with respect to the ship’s position. In particular, when the
ship sways with the waves, the cylindrical inflatable fenders roll
with little friction. Therefore, it will not damage the shipping
coating, and also can ease the swinging and vibrating of ship.
This rubber inflatable fenders have been widely used in oil
tankers, container ships, yachts, offshore platforms, large docks
Feature
1. Easy to install and maintain
2. Low reaction and hull pressure
3. More suitable for small and large tidal ranges
4. Lower maintenance cost
Application
1. Oil and gas tankers
2. Fast ferries and aluminium vessels
3. LPG vessels, ocean platforms, large docks
4. Harbors and wharfs
FAQ
Q Do you provide sample for test
A Yes,but need sample fee
Q Can i have my logo on the product
A Yes, Logo can be add on the product and package, this service has
include in the price
Q Which payments you accept for production
A T/T trade assurancecan be accept
Q How long for sample?
A General is 7 days according to specific product
Q Do you have experience with Amazon seller?
A yes,we have collaborate with many Amazeon sellers