Wuxi Tain Turbocharger Co.,LTD |
Verified Suppliers
|
|
GARRETT GT15/17 452089-0001 fit OPEl / Volkswagen / ford Turbocharger Bearing Housing
Turbo Bearing Housing
The bearing housing is what supports the entire system and routes the oil to the bearings. Usually made
of cast iron, the bearing housing can be air and oil cooled, or in many cases such as automotive use, it
contains water jackets to allow for watercooling.
The bearing housing also houses all of the other small parts critical to turbo operation, such as the gas
sealing system and oil control mechanisms. It also contains design features that insulate heat from the
turbine from migrating into the lube oil and cooking it after engine shut down.
Our NEW replacement bearing housings are cast in only the finest materials and are finished in OE
specification. Unless stated, all housings are a direct replacement for the original.
Product Name | Turbo Bearing house,Turbocharger bearing housing |
FIT TURBO |
454216-0001 454216-0002 454216-0003 454219-0001 454219-0002 454219-0003 454219-0004 454229-0001 454229-0002 454064-0001 454064-0002 454065-0002 454082-0001 454083-0001 454092-0001 454093-0001 454093-0002 454097-0001 454172-0001 452187-0001 708258-0001 709693-0001 721843-0001 452191-0001 452191-0002 452222-0007 452264-0001 452264-0002 452264-0003 452271-0001 452271-0002 452301-0001 452301-0002 452301-0003 727262-0001 727262-0002
|
Model | GT15 / GT17 |
SN No. | 433275-0002 |
Material | HT250 Gray iron |
Application |
Opel Vectra / Astra / Zafira
Opel Frontera B 2.2 Dti
Opel Sintra 2.2 L
Saab 900
Violkswagen t4 BUS
Ford Ranger pickup
NIssan L35
|
Inner packing: anti-rust paper,plastic bag,PE foam.
Outer packing: Neutral box,export carton with cushioning and
shockproof packaging.
Supply customized package.
1995 - Tain turbo was established , covers an area of 4,000 square meters,owns
complete production lines for compressor wheel,compressor housing,and turbo shafts.
2005 - Tain applied advanced PLC-6 low-pressure casting equipment.
2010 - Tain set up foreign trade department,specialized in exporting turbochargers,cartridges and other turbo parts,like shafts,compressor wheels,repair kits,ect.
2010 – Tain cooperated with several big dealers and distributers from German ,and develop a variety of VNT turbocharger.
2012 – Tain entered the south America market,and won a good reputation for our good quality,complete product chain and sincere service.
2015 - Tain applied SCHENCK TB Sonio-core assembly balancing equipment,and other testing equipments to establish a final product quality assurance system.
2017 - Tain imported a 5-Axis equipment - MAKINO L2.